| Stainless Steel Ball AISI440C 2.5mm G10 | L:240 mm; J:190 mm; G:R1/8"; Designation of bearing:ES212G2; H:69.9 mm; Recommended tightening torque for set screw:22 Nm; C0:32.8 kN; d:60 mm; N:18mm; A:60 mm; |
| FLAWBC3-9ZZ Bearings 3X9X2.5mm | Nlim:34,000 rpm; B:12 mm; Brand:SNR; d1:19.3 mm; Static load, C0:4.2 kN; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.34 Hz; f0:11.1; ra max:1 mm; Nref:20,000 rpm; |
| 1.4375 Inch Bore ER-23T Insert Ball Bearing | da min:257 mm; k:12 mm; B:160 mm; Characteristic outer ring frequency, BPF0:8.64 Hz; Characteristic inner ring frequency, BPFI:11.36 Hz; Characteristic cage frequency, FTF:0.43 Hz; b:19.37 mm; Static load, C0:3,990 kN; Min operating temperature, Tmin:-40 °C; Y2:2.86; |
| KB055AR0 139.7*155.575*7.9375mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | L:138 mm; C0:32.8 kN; Weight:3.73 kg; A2:69.7 mm; A1:16 mm; Designation of bearing:UC212-38G2T04; S:25.4 mm; T min.:-40 °C; T max.:100 °C; Recommended tightening torque for set screw:16.8 Nm; |
| KUC080 2RD Super Thin Section Ball Bearing 203.2x222.25x12.7mm | Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Bearing Used:Deep Groove Ball Bea; Bearing Retained:No; Holder Surface Treatment:Clear Anodize; Shape:T-Shaped; RoHS:6; Thickness T(mm):25 ～ 35; |
| LM16UU Linear Ball Bearings 16x28x37mm | Type:Bearings with Housin; Bearing Retained:No; Days to Ship:8 Days; Holder Surface Treatment:Not Provided; Bearing Used:Deep Groove Ball Bea; Height H(mm):30 ～ 50; Housing Material:304 Stainless Steel; Number of Bearings:Double; Shape:T-Shaped; |
| KG050CP0 127*177.8*25.4mm Thin Section Ball Bearings For Harmonic Drive Servo | Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; Shape:Flanged Pilot Type; Width T(mm):40 ～ 70; Flange O.D. H(φ):62; Bearing Used:Deep Groove Ball Bea; Flange Shape:Compact Type; Bearing Retained:Yes (with retaining; |
| CSXB042 Thin Section Ball Bearing 107.95x123.825x7.938mm | Y - ISO Factor1:1.44; r - Cup Frontface To Clear Radius2:0.06 in; G1 - Heat Generation Factor (Roller-Raceway)7:269; Series:71000; Y1 - ISO Factor5:1.62; Da - Cup Frontface Backing Diameter:7.17 in; D:7.5 in; C - Double Cup Width:3.1875 in; G2 - Heat Generation Factor (Rib-Roller End):45.7; Cg - Geometry Factor8:0.116; |