| CSED070 Thin Section Ball Bearing 177.8x203.2x12.7mm | Max Oil Speed:7100; H2:25.0 mm; Seal Type:Labyrinth; Shaft Diameter db:50 mm; J:160.00 mm; Bearing:21308; H1:60.0 mm; Housing:FSNT 510-608; A:90.00 mm; A2:102 mm; |
| CSXA075 Thin Section Ball Bearing 190.5x203.2x6.35mm | Preload Mark:C4; Specifications/Environment:Standard; Days to Ship:9 Days or more; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):20500; Precision:Grade 0; Max. Allowed rpm(rpm):2900; Inner/Outer Ring Material:Steel; Types:16**/6*** series; d:110; |
| CSED060 Thin Section Ball Bearing 152.4x177.8x12.7mm | Z:22.6 mm; Designation of housing:PA208N-; N:M14; Designation of bearing:UC208-24G2; E:20 mm; B:49.2 mm; C0:18.2 kN; Recommended tightening torque for set screw:8 Nm; L1:32 mm; L:116 mm; |
| 4.7625mm Plastic Ball- POM/PE/PP/PTFE | r1s min:1.5 mm; B:21 mm; Nlim (oil):5,800 rpm; ISO 355 reference:T7FB035; Dynamic load, C:63.5 kN; Y0:0.4; Minimum Buy Quantity:N/A; d1:59.5 mm; Characteristic rolling element frequency, BSF:5.53 Hz; Inventory:0.0; |
| 609A08-15YSX Deep Groove Bearings 15*40.5*14mm | C - Cup Width:12.700 mm; Y - ISO Factor9:1.49; D:51.994 mm; B - Cone Width:14.260 mm; d:25.001 mm; Design Units:Imperial; e - ISO Factor8:0.4; db - Cone Backface Backing Diameter:30.99 mm; G1 - Heat Generation Factor (Roller-Raceway):7.6; Db - Cup Backface Backing Diameter:44.96 mm; |
| JB047CP0 120.65*136.525*7.9375mm Thin Section Ball Bearing Thin-section Crossed Roller Bearings Manufacturer | Characteristic cage frequency, FTF:0.39 Hz; Y0:1.51; Characteristic inner ring frequency, BPFI:6.14 Hz; Nlim:19,000 rpm; Characteristic outer ring frequency, BPF0:3.86 Hz; D:47 mm; Max operating temperature, Tmax:120 °C; Y1:1.45; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:3.99 Hz; |
| BE20 Radial Insert Ball Bearing 20x55x16mm | s1:15.5 mm; T min.:-20 °C; B:31 mm; G:R1/8"; L:86 mm; T max.:100 °C; C0:6.65 kN; Z:26.5 mm; e:19 mm; J:63.5 mm; |
| B40-180C3P5 Servo Motor Bearing 40x90x23mm | T max.:200 °C; J:99 mm; s1:13.5 mm; B:27 mm; S:7.5 mm; C0:7.88 kN; G:M6x1; e:16 mm; d:23.81 mm; Recommended tightening torque for set screw:3.7 Nm; |