No. | Brand | f | B | g | h | v | R | P | F |
21mm | - | - | 34 mm | - | - | - | - | - | - |
15" | - | - | - | - | - | - | - | - | - |
CRS-18 | koyo | - | - | - | - | - | - | - | - |
T190 | - | - | 22 mm | - | - | - | - | - | - |
RVP-10 | Rexroth | - | - | - | - | - | - | - | - |
Lpvd45 | - | - | - | - | - | - | - | - | - |
E312xm | - | - | - | - | - | - | - | - | - |
4X8 | - | - | 41.2 mm | - | - | - | - | - | - |
2mm | - | - | - | - | - | - | - | - | - |
6211 | - | - | - | - | - | - | - | - | - |
EL200B | INA | - | 18 mm | - | - | - | - | - | - |
CRI-0881 | - | - | - | - | - | - | - | - | - |
38A | Timken | - | - | - | - | - | - | - | - |
85cm | - | - | - | - | - | - | - | - | - |
6514 | - | - | - | - | - | - | - | - | - |
NN3044/W33 | INA | - | - | - | - | - | - | - | - |
22226EASK.M.C3, | fag | - | - | - | - | - | - | - | - |
45 | - | - | - | - | - | - | - | - | - |
32915 | NTN | - | 41.2 mm | - | - | - | - | - | - |
6203 | - | - | - | - | - | - | - | - | - |
09262-35080-000 | - | - | 32.5 mm | - | - | - | - | - | - |
6704Z | - | - | 74.6 mm | - | - | - | - | - | - |
30-16128 | - | - | 49.2 mm | - | - | - | - | - | - |
LH1__ | - | - | - | - | - | - | - | - | - |
110 mm x 150 mm x 40 mm RCB-101416-FS Drawn Cup Roller Clutch 15.875x22.225x25.4mm | Lw:7.8 mm; Mass:0.0013 kg; Brand:NTN; b:10 mm; Cr:4 kN; Characteristic rolling element frequency, BSF:6.18 Hz; C0r:4.1 kN; Max operating temperature, Tmax:120 °C; Ew:11 mm; Nlim (oil):32,000 rpm; Size (mm):110 mm x 150 mm x 40 mm ; |
FXN31-17DX Backstop / Freewheel Clutch / One Way Clutch Bearing | Inner/Outer Ring Material:Steel; Outer Ring Shape:Flat; Load Direction:Radial; Rolling Element Material:Steel; D:100; Precision:Grade 0; Size Standards:Metric System; Combination symbol:G; B:25; Retainer Type:Punching; |
OWC511GXLZ One Way Clutch Bearing 5x11x5.4mm | A1:19 mm; Recommended tightening torque for set screw:5.5 Nm; H1:10 mm; S:6.5 mm; E:9 mm; d:12 mm; d1:27.2 mm; s1:23.05 mm; L:70 mm; G:M6x1; |
FC-30 Drawn Cup Roller Clutch 30x37x20mm | S:15.9 mm; Designation of housing:C206-; s1:19.05 mm; Recommended tightening torque for set screw:3.7 Nm; C0:11.2 kN; A5:22.2 mm; C:19.5 kN; T max.:200 °C; H:85 mm; T min.:-20 °C; |
RSCI50 One Way Clutches Sprag Type (50x150x40mm) Overrunning Freewheel Clutch | Seal, Shield Symbols:LLB; Type:Ball; d:15; Retainer Type:Punching; Rolling Element Material:Steel; Number of Raceway Ring Rows:Single Row; B:5; Size Standards:Metric System; Grease symbol:/2AS; |
BS85 One Way Clutch Bearing (60-85)x210x115mm | S:9 mm; e:18 mm; T min.:-20 °C; s1:27.8 mm; L1:72 mm; Designation of housing:FA206-; C:19.5 kN; A1:14 mm; C0:11.2 kN; A:31 mm; |
FXM51-25DX Backstops / Freewheel Clutch / One Way Clutch Bearing | S:34.2 mm; d1:102 mm; Designation of housing:C314-; SW:5.56 mm; T min.:-20 °C; d:68.26 mm; B:68.3 mm; B1:92.1 mm; T max.:100 °C; A:52 mm; |
RSCI80M One Way Clutch Bearing 80x210x70mm | Bearing Part Number:6901; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Height Indication:Height Selection; Holder Surface Treatment:Black Oxide Coating; Number of Bearings:Single; Bearing Material:[Steel] Steel; Height H(mm):20 ~ 40; RoHS:6; |
ROLA3572 One Way Clutch Bearing 35x72x17mm Video