| F682ZZ 2X5X2.3MM RC Helicopter Flanged Bearing | Holder Surface Treatment:Not Provided; Number of Bearings:Single; Shape:Bottom Mount; Bearing Retained:Yes (with retaining; Housing Material:304 Stainless Steel; Width T(mm):17; Lateral Width L(mm):44; Height H(mm):30 ～ 50; Days to Ship:8 Days; |
| CSXF140 Thin Section Ball Bearing 355.6x393.7x19.05mm | Cone Part Number:HH437549; Design Units:Imperial; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:61400 lbf; Aa - Cage-Cone Backface Clearance:0.43 in; C1 - Dynamic Radial Rating (1 million revolutions)6:372000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:168000 lbf; da - Cone Frontface Backing Diameter:7.72 in; a - Effective Center Location4:-0.84 in; Cg - Geometry Factor:0.131; |
| Stainless Steel Ball AISI440C 5.556mm G10 | Static load, C0:721 kN; Fatigue limit load, Cu:63.4 kN; d2:146 mm; Max operating temperature, Tmax:200 °C; Characteristic inner ring frequency, BPFI:13.38 Hz; D:200 mm; Brand:SNR; Radial clearance class:CN; Da max:191.2 mm; B:52 mm; |
| D23 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 47.625x81.763x20.65mm | Basic Load Rating, Dynamic Rating(kN):22.8; Shaft:No; Roller Follower Type:Non-Separable Type; Inner Ring:Presence; Category:Roller Follower; Roller O.D. D(Ø):52; d:25; RoHS:6; Material:[Carbon Steel] Carbo; Roller Width B(mm):25; |
| KD180CP0 457.2*482.6*12.7mm Thin Section Ball Bearing Harmonic Drive Bearing | Static load, C0:1,450 kN; Characteristic rolling element frequency, BSF:8.42 Hz; Number of lubrication holes:3; Characteristic outer ring frequency, BPF0:10.61 Hz; d:180 mm; b:13.2 mm; B:74 mm; Characteristic cage frequency, FTF:0.44 Hz; d2:203.6 mm; da min:190.2 mm; |
| 6202-5/8 Deep Groove Ball Bearings 15.875X35X11mm | C:52 mm; Locknut:HM3084; Ro:M6; Appropriate Hydraulic Nut:HMV84; G:Tr420x5; e:4 mm; L1:212.00 mm; d1:400.00 mm; D3:490 mm; Weight:43.70 Kg; |
| D15 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 34.925x62.713x15.875mm | Type:Bearings with Housin; Flange O.D. H(φ):134; Bearing Part Number:6208; Number of Bearings:Double; Bearing I.D. d(mm):40; Flange Shape:Square Type; Holder Surface Treatment:Black Oxide Coating; RoHS:6; |
| JB042CP0 107.95*123.825*7.9375mm Thin Section Ball Bearing Thin-section Crossed Roller Bearings Manufacturer | T max.:100 °C; C:12.8 kN; C0:6.65 kN; H2:41 mm; s1:15.5 mm; Designation of bearing:UC204G2L4; Dz:54 mm; Designation of open end cover:SCO204-20; S:12.7 mm; G:R1/8"; |