| SCH20 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing | S:7.5 mm; d:23.81 mm; T max.:100 °C; A2:38.5 mm; C0:7.88 kN; Weight:0.61 kg; L:70 mm; Designation of open end cover:SCOU205-15; J:99 mm; N:11,5mm; |
| 5303-2RS High Speed Double Row Angular Contact Ball Bearings 17x47x22.2mm | H1:28.6 mm; N1:29.1 mm; S:25.4 mm; Z:96.4 mm; C:52.5 kN; H2:138.1 mm; T max.:200 °C; Designation of bearing:UC212-36G2T20; B:65.1 mm; N:18mm; |
| CSXF090 Four-point Contact Thin Section Bearing | Taper:1:12; Sleeve:S-24 x 4 1/16; Tolerance1:-0.005 in; Lockwasher and Lockplates:W-24; D1:6.130 in; B2:3.456 in; Bearing Number:22224K; Diameter d :4 1/16 in; S:0.938 in; SNW/SNP Assembly Weight:6.65 lb; |
| 1.375 Inch Bore ER-22T Insert Ball Bearing | Reference Thermal Speed Rating (Grease):260; Design Unit:METRIC; Cg - Geometry Factor8:0.1435; Reference Thermal Speed Rating (Oil)7:300; Cage Type:YMB; Y0 - ISO Factor4:4.4; B - Outer Ring Width:200.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):7120000 N; da - Inner Ring Backing Diameter:918.000 mm; C0 - Static Radial Rating:16200000 N; |
| CSCC060 Thin Section Ball Bearing 152.4x171.45x9.525mm | Aa - Cage-Cone Backface Clearance:0.14 in; d:8.5000 in; C0 - Static Radial Rating:181000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:85100 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:22100 lbf; Ab - Cage-Cone Frontface Clearance:0.13 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:148000 lbf; Cg - Geometry Factor:0.135; K - Factor8:1.21; Design Units:Imperial; |
| KF110CP0 279.4*317.5*19.05mm Thin Section Ball Bearing Hollow Shaft Rotary Actuator | B:42.9 mm; s1:21.45 mm; C:22 kN; J:130 mm; Recommended tightening torque for set screw:8.3 Nm; Designation of housing:NFL207-; T min.:-20 °C; L:90 mm; N:13mm; A1:16.1 mm; |
| 202-XL-KRR Radial Insert Ball Bearing 15x35x14.4mm | a - Effective Center Location4:-0.13 in; Aa - Cage-Cone Backface Clearance:0.02 in; C1 - Dynamic Radial Rating (1 million revolutions)6:6760 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:11800 lbf; Cg - Geometry Factor:0.0526; Design Units:Imperial; Cone Part Number:KL44643; K - Factor8:1.56; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:1120 lbf; C0 - Static Radial Rating:7400 lbf; |
| Stainless Steel Ball AISI440C 5.556mm G10 | Static load, C0:721 kN; Fatigue limit load, Cu:63.4 kN; d2:146 mm; Max operating temperature, Tmax:200 °C; Characteristic inner ring frequency, BPFI:13.38 Hz; D:200 mm; Brand:SNR; Radial clearance class:CN; Da max:191.2 mm; B:52 mm; |