| No. | Brand | F | C | H | E | L | J | d | i |
| 23pcs | - | - | - | 102 mm | - | - | 78 mm | - | - |
| 1X | - | - | - | - | - | - | - | - | - |
| MPV046 | - | - | 31.85 kN | - | 24 mm | - | - | 42.86 mm | - |
| Nu306 | - | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | 3.3475 in | - |
| 99.5% | - | - | - | - | - | - | - | 15.875 mm | - |
| 608260-7 | NTN | - | - | 33.3 mm | - | 130 mm | - | 20 mm | - |
| 6917 | NTN | - | - | - | - | - | - | - | - |
| ZX450 | INA | - | - | - | - | - | - | - | - |
| 1x | - | - | - | - | - | - | - | - | - |
| TRA5182A | - | - | - | - | - | - | - | 45 | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| (5mm/6mm/8mm/9mm/11mm/21mm) | - | - | - | - | - | - | - | - | - |
| Sk220-2, | - | - | - | - | - | - | - | 20 | - |
| 21309-E1 | fag | - | - | - | - | - | - | 17 mm | - |
| 22220 | SKF | - | - | - | - | - | - | - | - |
| (NH4CL) | - | 25.5 mm | - | - | - | - | - | - | - |
| 6t | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| TKIT-2005-D2-F | - | - | - | 49.2 mm | 20 mm | - | 84 mm | - | - |
| X6 | - | - | - | 90 mm | - | - | - | - | - |
| 12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| R180LC-7 | - | - | - | - | - | - | - | 55 | - |
| 21 | INA | - | - | - | - | 130 mm | 97 mm | 15 mm | - |
| 7018 | NSK | - | - | 190 mm | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 25pcs | - | - | - | - | - | - | - | - | - |
| PHS520S-02 | Parker | - | - | - | - | - | - | 180 mm | - |
| JHA15XL0 38.1*47.625*6.35mm Thin Section Ball Bearing Thin-walled Deep Groove Ball Bearing Factory | A:38 mm; L:98 mm; A1:25 mm; B:30 mm; Recommended tightening torque for set screw:5.5 Nm; G:R1/8"; T min.:-40 °C; d:30 mm; Designation of housing:PAE206-; H2:82 mm; |
| JB040XP0 101.6*117.475*7.9375mm Thin Section Ball Bearing Harmonic Drive Wave Generator | Housing:FSNT 524-620; H1:140.0 mm; Shaft Diameter db:115 mm; Seal Type:Double Lip; H:271 mm; N1:24.00 mm; L:410.00 mm; A1:120 mm; Shaft Diameter da:100 mm; J2:378 mm; |
| 51205 Plane Roll Axial Ball Thrust Bearing For Hardware Accessories 25*47*15mm | T max.:100 °C; s1:24.6 mm; d:44.45 mm; N:17mm; L1:62 mm; A:70 mm; A1:36 mm; H2:157 mm; B:49.2 mm; J:146 mm; |
| JB035CP0 88.9*104.775*7.9375mm Thin Section Ball Bearing Harmonic Drive Wave Generator | d:10; B:9; Type:Ball; Outer Ring Shape:Flat; Load Direction:Radial; Precision:Grade 0; Retainer Type:Punching; Size Standards:Metric System; Bearing Style:Open Type; Grease symbol:/LP03; |
| CSXU055 Thin Section Ball Bearing 139.7x158.75x12.7mm | r:0.6; C1:4.4 mm; Weight:0.22 kg; B1:43.5 mm; SW:3 mm; B2:13.5 mm; S:17 mm; D:47 mm; C:16 mm; T max.:200 °C; |
| 5211ZZ Axial Double Row Angular Contact Ball Bearings 55*100*33.3mm | d:30 mm; t:1.8 mm; B:18 mm; Mass:0.05 kg; da min:32 mm; ras max:0.3 mm; rs min:0.3 mm; Lubrication hole on inner ring:Non/No; Brand:NTN; Precision class:P0; |
| 5204ZZ Axial Double Row Angular Contact Ball Bearings 20*47*20.6mm | Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):62; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):20; Width T(mm):35; Type:Bearings with Housin; Volume Discount:Available; |
| PHUSE35 PHUSE35-XL Take-up Housing Units Plummer Block Bearing | O.D.(Ø):68; Precision:Grade 4; Outer Ring Shape:Flat; Outer Ring:With Outer Ring; Clearance sign:CN (standard); Special Configurations Code:No; Load Direction:Radial; Type:Angular Contact Ball; Preload Mark:L; |
Stainless Steel Ball AISI440C 2.381mm G10 Video