| 75 mm x 115 mm x 20 mm Stainless Steel Ball AISI440C 2.778mm G10 | Housing Width:4.5 in; Dimension H1:1.3 in; Bolt Size:2 x M16; Dimension H2:7.1 in; Dimension H:3.150 in; Bearing Type:Split Cylindrical Ex; Note:This product line wa; Bearing Number:MSE111BX; Cr - Dynamic Load Rating:27202 lbf; Series Type:Medium Series; Size (mm):75 mm x 115 mm x 20 mm ; |
| 4mm Ceramic Balls （zirconia) | Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):58.6; B - Cone Width:1.1542 in; K - Factor8:1.74; C0 - Static Radial Rating:37200 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16300 lbf; G2 - Heat Generation Factor (Rib-Roller End):17.1; a - Effective Center Location4:-0.28 in; Cone Part Number:455; da - Cone Frontface Backing Diameter:2.32 in; |
| CSCA120 Thin Section Ball Bearing 304.8x317.5x6.35mm | Nlim (oil):11,000 rpm; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; da min:34 mm; Da max:45 mm; Min operating temperature, Tmin:-20 °C; Mass:0.17 kg; Characteristic inner ring frequency, BPFI:12.9 Hz; C0r:69.5 kN; Precision class:P0; |
| 5314-2RS High Speed Double Row Angular Contact Ball Bearings 70x150x63.5mm | Days to Ship:Same day; Nominal of Thread(mm):M130; Material:Steel; Surface Treatment:No Surface Treatment; Shape:Round shape; Threaded Direction:Right Screw; RoHS:6; Type:Lock Nut; Screw Type:Metric (fine) Thread; |
| KUX055 2RD Super Thin Section Ball Bearing 139.7x158.75x12.7mm | Bearing Unit, Type:Diamond Flange Shape; Stroke:No; Surface Treatment:No; d:45; Basic Load Rating, Dynamic Rating(N):43400; Machining:No; Rolling Element Material:Bearing Steel; Unit Body Material:Cast Iron; Accessory:With steel plate cov; |
| 72-U3 / 72U3 Thrust Ball Bearing 15.96*34*14.3mm | A:33.5 mm; C0:11.2 kN; N:11,5mm; A2:42.2 mm; Designation of housing:FE206N-; B:38.1 mm; e:20 mm; L:108 mm; Dz:70 mm; Recommended tightening torque for set screw:3.7 Nm; |
| KA035AR0 88.9*101.6*6.35mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | Unit Body Material:Cast Iron; Fit:J7; Seal:Silicone; Bearing Unit, Type:Square flange shape; Basic Load Rating, Dynamic Rating(N):34100; Machining:Cast iron cover moun; Days to Ship:8 Days; Bearing Inner Dia. Shape:Tapered hole adapter; d:40; Rolling Element Material:Bearing Steel; |
| 88014 14*35*14.399mm Nonstandard Deep Groove Ball Bearings | Seal:Silicone; Unit, Type:Insert Bearing Unit; d:80; Bearing Unit, Type:Others; Bearing Inner Dia. Shape:Tapered hole adapter; Stroke:No; Machining:No; Basic Load Rating, Dynamic Rating(N):109000; Days to Ship:Quote; |