| No. | Brand | F | C | H | E | L | J | d | i |
| TACOMA/TUNDRA/4RUNNER/SEQUOIA | koyo | - | - | - | - | - | - | - | - |
| 60pc | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | 19.5 kN | - | - | - | - | 28.58 mm | - |
| SX95 | John Deere | - | - | - | - | - | - | - | - |
| NKXR50-Z-XL | INA | - | - | - | - | - | - | - | - |
| QJ1038N2MA | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 6220-RSR | fag | - | - | - | - | - | - | 20 mm | - |
| 660 | NTN | - | 57.2 kN | 258 mm | - | - | 216 mm | 65 mm | - |
| 16MPA | - | - | - | - | - | - | - | - | - |
| S6K | - | - | - | - | - | - | - | - | - |
| 315cc | - | - | - | - | - | - | - | 200 mm | - |
| 15X42X13 | - | - | - | - | - | - | - | 55 | - |
| 312 | - | - | - | - | - | - | 126 mm | - | - |
| 250 | fag | - | - | - | - | - | - | - | - |
| 220cc | - | - | - | - | - | - | - | - | - |
| (NFFP-1122) | - | - | - | 57.2 mm | - | 206 mm | 159 mm | - | - |
| GM05 | - | - | - | - | - | - | - | 17 | - |
| Valve,Angld,1/4In,Flare-Male | Parker | - | - | - | - | - | - | - | - |
| 22314CCK | SKF | - | - | - | - | - | - | 55 mm | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 3730 | Timken | - | 14 kN | 80 mm | - | - | 105 mm | 25 mm | - |
| 12-12-17+2MGO | - | - | - | - | - | - | - | 45 mm | - |
| KB30 | INA | - | - | - | - | - | - | 130 mm | - |
| CM232BE | Parker | - | - | - | - | - | - | 1.3750 in | - |
| 500 | - | - | - | - | - | - | - | - | - |
| 5217ZZ Axial Double Row Angular Contact Ball Bearings 85*150*49.2mm | J:82.5 mm; e:20 mm; A2:42.2 mm; s1:19.05 mm; A1:12 mm; Designation of housing:FE206N-; Weight:1.16 kg; Recommended tightening torque for set screw:5.5 Nm; C:19.5 kN; L:108 mm; |
| B38 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 71.438x113.51x28.58mm | B - Cone Width:1.0000 in; Cg - Geometry Factor:0.0801; G1 - Heat Generation Factor (Roller-Raceway):35.2; Design Units:Imperial; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0.01 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9180 lbf; d:1.6875 in; C0 - Static Radial Rating:24900 lbf; db - Cone Backface Backing Diameter:2.09 in; |
| GRAE17NPPB Pillow Block Bearings 17X40X12mm | Radius Rs min:0.300 mm; Bore Size d:20 mm; Oil Limiting Speed:20000 rpm; Features:Open; Clearance:C3; Outside Diameter D:42.000 mm; C0r - Static Load Rating:3.8 kN; Weight:0.05 Kg; Grease Limiting Speed:13000 rpm; Outside Ring Width B:8.000 mm; |
| BE30-XL Radial Insert Ball Bearing 30x72x21mm | Type:Bearings with Housin; Bearing Retained:No; Flange Shape:Compact Type; Seals:DD (Contact Rubber S; Width T(mm):35 ～ 70; Shape:Flange Type; RoHS:6; Holder Surface Treatment:Electroless Nickel P; |
| CSCC055 Thin Section Ball Bearing 139.7x158.75x9.525mm | L(inch):0.125 ～ 4; Surface Treatment:Black Oxide; L Dimension Tolerance:+0.000/-0.005; RoHS:6; Material:Low Carbon Steel; D(inch):16 ～ 18; Days to Ship:8 Days; |
| CSED045 Thin Section Ball Bearing 114.3x139.7x12.7mm | Cup Part Number:HM88613; C - Cup Width:0.8442 in; r - Cup Backface To Clear Radius1:0.06 in; Series:HM88600; Cg - Geometry Factor:0.0822; Da - Cup Frontface Backing Diameter:2.74 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:2.44 in; Y - ISO Factor3:1.1; D:2.8750 in; |
| KD200CP0 508*533.4*12.7mm Thin Section Ball Bearing Harmonic Drive Bearing | H3:70; A1:9 mm; s1:13.5 mm; d:25.4 mm; Designation of housing:FCE205-; C:14 kN; S:7.5 mm; A:20 mm; J:90 mm; C0:7.88 kN; |
| SCH35 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing | T min.:-20 °C; J:212 mm; C0:51.8 kN; G:M6x1; L:160 mm; A:56 mm; B:71 mm; N:31mm; Recommended tightening torque for set screw:27.1 Nm; S:26 mm; |
3801-2RS Double Row Sealed Angular Contact Ball Bearings 12x21x7mm Video