| GRA012-NPP-B-AS2/V Radial Insert Ball Bearing | Shape:Bottom Mount; Bearing I.D. d(mm):15; Height H(mm):30 ～ 50; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; Bearing Part Number:6202; Bearing Retained:Yes (with retaining; Height Indication:Height Configurable; |
| 30526D Bearing 180 X 259.5 X 66mm | Recommended tightening torque for set screw:8 Nm; d:38.1 mm; T max.:200 °C; A:36 mm; L1:87 mm; J1:71 mm; G:M6x1; H:175 mm; Designation of housing:FA208N-; A1:16 mm; |
| CSCD100 Thin Section Ball Bearing 254x279.4x12.7mm | Dz:80 mm; Weight:1.53 kg; B:42.9 mm; J:92 mm; T max.:100 °C; L:117 mm; S:17.5 mm; d:35 mm; Recommended tightening torque for set screw:11.5 Nm; Designation of bearing:UC207G2L3; |
| KC042AR0 Thin Section Ball Bearing | Characteristic inner ring frequency, BPFI:6.42 Hz; Static load, C0:3.7 kN; Characteristic rolling element frequency, BSF:5.82 Hz; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:4.58 Hz; Characteristic cage frequency, FTF:0.42 Hz; d:20 mm; Da max:35 mm; Dynamic load, C:6.4 kN; Mass:0.04 kg; |
| 60 mm x 110 mm x 22 mm JU090CP0 Thin Section Ball Bearing 228.6x247.65x12.7mm Bearing | Dimension T:20.0 in; Dimension P:1.1 in; Cor - Static Load Rating:186142 lbf; Bearing UPC:013992104922; Dimension V:0.1 in; Bolt Size:4 x M24; Shaft Size:6.75 in; Seal Type:Felt Seal; Support Type:Round Flange; Note:This product line wa; Size (mm):60 mm x 110 mm x 22 mm ; |
| 5204ZZ Axial Double Row Angular Contact Ball Bearings 20*47*20.6mm | Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):62; Bearing Material:[Steel] Steel; Bearing I.D. d(mm):20; Width T(mm):35; Type:Bearings with Housin; Volume Discount:Available; |
| 4mm Ceramic Balls （zirconia) | Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):58.6; B - Cone Width:1.1542 in; K - Factor8:1.74; C0 - Static Radial Rating:37200 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:16300 lbf; G2 - Heat Generation Factor (Rib-Roller End):17.1; a - Effective Center Location4:-0.28 in; Cone Part Number:455; da - Cone Frontface Backing Diameter:2.32 in; |
| GLE20-KRR-B Radial Insert Ball Bearing | Ab - Cage-Cone Frontface Clearance:4.1 mm; r - Cup Backface To Clear Radius2:6.35 mm; G1 - Heat Generation Factor (Roller-Raceway):606.1; R - Cone Backface To Clear Radius1:6.35 mm; K - Factor7:1.51; C90 - Dynamic Radial Rating (90 million revolutions)4:56300 lbf; Y - ISO Factor9:1.55; Cone Part Number:DX513576; C - Cup Width:57.150 mm; Aa - Cage-Cone Backface Clearance:6.9 mm; |