| No. | Brand | F | C | H | E | L | J | d | i |
| ZX330-3 | - | - | - | - | - | - | - | - | - |
| EC55 | - | - | - | - | - | - | - | - | - |
| 635 | - | - | - | - | - | - | - | - | - |
| 23000L | - | - | - | - | - | - | - | - | - |
| Kr210 | INA | - | - | - | - | - | - | - | - |
| 2/5/10PCS | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | - | - | - | - |
| ZL-26 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 7314 | fag | - | - | - | - | - | - | - | - |
| ISO9001 | - | - | - | - | - | - | - | 50 mm | - |
| 1X | - | - | - | - | - | - | - | - | - |
| (87-2) | - | - | - | - | - | - | - | - | - |
| 40x74x40 | - | - | - | - | - | - | - | - | - |
| 2] | - | - | - | - | - | - | - | - | - |
| 3/4/5/6/7/8/9MM | - | - | - | - | - | - | - | 60 | - |
| 100ml | - | - | - | - | - | - | - | - | - |
| DX1-611-961MB | Parker | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| 13mm | - | - | - | - | - | - | - | - | - |
| JB065XP0 165.1*180.975*7.9375mm Thin Section Ball Bearing Harmonic Drive Wave Generator | Brand:SNR; da min:144 mm; Number of lubrication holes:3; d2:150.7 mm; Fatigue limit load, Cu:80.2 kN; Dynamic load, C:958 kN; Characteristic rolling element frequency, BSF:6.33 Hz; Max operating temperature, Tmax:200 °C; e:0.32; Min operating temperature, Tmin:-40 °C; |
| MR115 ZZ 5X11X4MM Deep Groove Ball Bearing | Bearing UPC:013992027894; Dimension M:120 mm; Housing Width:5.5 in; Bolt Size:2 x M24; Dimension J:350 mm; Cor - Static Load Rating:95993 lbf; Seal Type:High Temperature Pac; Dimension H:140 mm; Series Type:Light Series; Pillow/Plummer Block Style:Split Cylindrical Ho; |
| 51205 Plane Roll Axial Ball Thrust Bearing For Hardware Accessories 25*47*15mm | T max.:100 °C; s1:24.6 mm; d:44.45 mm; N:17mm; L1:62 mm; A:70 mm; A1:36 mm; H2:157 mm; B:49.2 mm; J:146 mm; |
| D39-1/2 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 76.2x116.688x25.4mm | N:26mm; B1:78 mm; B:44 mm; L1:90 mm; H2:175 mm; T min.:-20 °C; L:290 mm; C0:54.2 kN; A1:55 mm; d1:105 mm; |
| E30-KRR-B Radial Insert Ball Bearing | Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Volume Discount:Available; RoHS:6; Type:Bearings with Housin; Seals:DD (Contact Rubber S; Flange O.D. H(φ):59; Number of Bearings:Double; Bearing Retained:Yes (with retaining; Bearing Part Number:6902; |
| CSXU060-2RS Four-point Contact Thin Section Bearing | H:55.6 mm; N:14mm; H1:19.3 mm; Designation of housing:PLE210-; S:19 mm; A:55 mm; s1:25.8 mm; B:51.6 mm; Designation of bearing:UC210-30G2T04; A1:36 mm; |
| KUX060 2RD Super Thin Section Ball Bearing 152.4x171.45x12.7mm | J:68 mm; H2:93 mm; H:47.6 mm; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; Designation of housing:PG207N-; Designation of open end cover:SCOU207-22; N:M12; L:100 mm; d:34.92 mm; |
| E25-KRR-B Radial Insert Ball Bearing | Y0:0.6; ra max:3.5 mm; Rating life coefficient, A2:1.9; Characteristic outer ring frequency, BPF0:7.8 Hz; Y2:1.1; a:23.57 mm; Nlim (grease):5,100 rpm; Nlim (oil):6,800 rpm; Brand:NTN; D:76.2 mm; |
KA042AR0 107.95*120.65*6.35mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing Video