| No. | Brand | F | C | H | E | L | J | d | i |
| 90% | - | - | 52.5 kN | - | - | - | - | - | - |
| 20.5% | - | - | 72.5 kN | - | - | - | - | - | - |
| 1637- | - | - | - | - | - | - | - | - | - |
| YH1-18321-05-0H | - | - | 12.8 kN | 31.8 mm | - | - | - | - | - |
| RNA4900-RSR-XL | INA | - | - | - | - | - | - | - | - |
| AS/NZS4357 | - | - | 31.85 kN | 117 mm | - | 144 mm | - | - | - |
| 5/8 | - | - | - | - | - | 185.00 mm | - | - | - |
| 25pcs | - | - | - | - | - | - | - | - | - |
| BMT630 | - | - | - | - | - | - | - | - | - |
| 3mm-30mm | - | - | - | - | - | - | - | - | - |
| 4ft | - | - | - | - | - | - | - | - | - |
| 22215-E1 | fag | - | - | - | - | - | - | 80 | - |
| 15X42X13 | - | - | - | - | - | - | - | 55 | - |
| 41.63030 | Nachi | - | 5.724 in | 0.198 in | 5.281 in | - | - | - | - |
| 17% | - | - | - | 89 mm | - | - | - | - | - |
| 4'x8' | - | - | - | - | - | - | - | - | - |
| 650 | NTN | - | - | 53.9 mm | - | - | 95.3 mm | - | - |
| 6308 | SKF | - | - | - | - | - | - | 40 | - |
| RX-7 | - | - | - | - | - | - | - | - | - |
| 30mm | - | - | - | - | - | - | - | 31.75 mm | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| NU317 | - | - | - | - | 20 mm | 116 mm | - | - | - |
| Xg-1620 | - | - | - | - | - | - | - | - | - |
| 92 | - | - | - | - | - | - | - | - | - |
| PFD1 | FAFNIR | - | - | - | - | - | - | 11.0070 in | - |
| 955 | - | - | - | - | - | - | - | - | - |
| 3803-2RS Double Row Sealed Angular Contact Ball Bearings 17x26x7mm | Cr - Dynamic Load Rating:42039 lbf; Bearing UPC:013992026279; Dimension J:290 mm; Support Type:Two-Bolt Plummer Blo; Seal Type:Kevlar Packing Seal; Shaft Size:3.25 in; Bearing Type:Split Cylindrical Re; Dimension L:345 mm; Dimension H2:230 mm; Bearing Number:LSE304BR; |
| JB042CP0 107.95*123.825*7.9375mm Thin Section Ball Bearing Thin-section Crossed Roller Bearings Manufacturer | T max.:100 °C; C:12.8 kN; C0:6.65 kN; H2:41 mm; s1:15.5 mm; Designation of bearing:UC204G2L4; Dz:54 mm; Designation of open end cover:SCO204-20; S:12.7 mm; G:R1/8"; |
| 3E830KAT2 150*200*30mm Harmonic Drive Wave Generator Bearing | Shaft Size :85 mm; Dimension D Max:11.25 in; Oil Lubrication - B/C/O Seal:1000 rpm; Pre Install Clearance Min:0.0043 in; Full Timken Part Number:QVP19V085SB; Dimension D Min:9.38 in; Dimension SV:3.69 in; Grease Lubrication - M/N Seal:1300 rpm; Oil Lubrication - T Seal:2200 rpm; Float:0.083 in; |
| 40 mm x 80 mm x 23 mm KJA070 RD Super Thin Section Ball Bearing 177.8x196.85x12.7mm | Type:Ball; B:47; Load Direction:Radial; D:215; Days to Ship:9 Days or more; Types:16**/6*** series; Bearing Style:Rubber Sealed; Size Standards:Metric System; RoHS:6; Basic Dynamic Load Rating(N):173000; Size (mm):40 mm x 80 mm x 23 mm ; |
| CSCF060 Thin Section Ball Bearing 152.4x190.5x19.05mm | Retainer Type:Punching; Rolling Element Material:Steel; Outer Ring Shape:Flat; Basic Dynamic Load Rating(N):930; Load Direction:Radial; Size Standards:Metric System; Specifications/Environment:Standard; Seal, Shield Symbols:LLF; Max. Allowed rpm(rpm):8300; Bearing Style:Rubber Sealed; |
| KC042AR0 Thin Section Ball Bearing | Characteristic inner ring frequency, BPFI:6.42 Hz; Static load, C0:3.7 kN; Characteristic rolling element frequency, BSF:5.82 Hz; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:4.58 Hz; Characteristic cage frequency, FTF:0.42 Hz; d:20 mm; Da max:35 mm; Dynamic load, C:6.4 kN; Mass:0.04 kg; |
| Single Row 88602 15*42*17mm Non Standard Ball Bearings | G:M6x1; Dz:100 mm; T min.:-20 °C; Weight:3.16 kg; C:35.1 kN; Recommended tightening torque for set screw:11.5 Nm; A:60 mm; Designation of housing:PG210N-; T max.:100 °C; N:M16; |
| D39-1/2 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 76.2x116.688x25.4mm | N:26mm; B1:78 mm; B:44 mm; L1:90 mm; H2:175 mm; T min.:-20 °C; L:290 mm; C0:54.2 kN; A1:55 mm; d1:105 mm; |
KC055CP0 139.7*158.75*9.525mm Thin Section Ball Bearings,low Price Harmonic Reducer Bearing Video