| No. | Brand | F | C | H | E | L | J | d | i |
| 203KRR2 | John Deere | - | - | - | - | - | - | - | - |
| 7222 | - | - | - | - | - | - | 105 mm | 22.22 mm | - |
| 1975-2007 | koyo | - | - | - | - | - | - | - | - |
| NC302 | NSK | - | - | - | - | - | - | - | - |
| PHS520S-02 | Parker | - | - | - | - | - | - | 180 mm | - |
| 215/70R16 | - | - | - | - | - | - | 146 mm | 44.45 mm | - |
| 1637- | - | - | - | - | - | - | - | - | - |
| R10ZZ/2AS | NTN | - | 113.36 kN | 100 mm | - | - | - | - | - |
| 23176CAK/W33 | - | - | - | 57.2 mm | - | 135 mm | - | 49.21 mm | - |
| k2 | - | - | - | - | - | - | - | - | - |
| 24 | - | - | 52.5 kN | - | - | - | - | 61.91 mm | - |
| GS1100 | - | - | - | - | - | - | - | - | - |
| 21268 | - | - | - | - | - | - | - | - | - |
| (MgSO4.7H2O) | - | - | 12.8 kN | 30.2 mm | - | - | 52 mm | 19.05 mm | - |
| 1mm | - | - | - | - | - | - | - | 35 mm | - |
| H2EVXBG0B9C | Parker | - | - | 130 mm | - | - | 99 mm | - | - |
| 4*8 | - | - | - | - | - | - | - | - | - |
| 18-18-18 | - | - | - | - | - | - | - | - | - |
| SH200A2 | - | - | - | - | - | - | - | - | - |
| 23044 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| A10VD43 | - | 95.5 mm | - | - | - | - | - | - | - |
| 1307b | Rollway | - | - | - | - | - | - | - | - |
| JA025XP0 63.5*76.2*6.35mm Thin Section Ball Bearing Thin Section Bearings Factory | Designation of housing:FLE203N-; Designation of bearing:US203-11G2T04; S:6 mm; G:M6; Z:37.6 mm; B:22 mm; s1:11 mm; d:17.46 mm; A:26 mm; T min.:-40 °C; |
| D31 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 60.325x97.638x20.65mm | T min.:-20 °C; Designation of housing:F312-; Designation of bearing:UC312-39G2T20; T max.:200 °C; G:M6x1; e:33 mm; J:150 mm; A1:22 mm; B:71 mm; Weight:6.3 kg; |
| LR5005NPPU (LR5005 2RS) Track Roller Bearings 25x52x16mm | Dynamic load, C:19.5 kN; D:62 mm; f0:13.8; Static load, C0:11.3 kN; Brand:NTN; da max:39 mm; ra max:1 mm; Mass:0.2 kg; Characteristic rolling element frequency, BSF:4.68 Hz; Max operating temperature, Tmax:110 °C; |
| PE20 Radial Insert Ball Bearing 20x55x31.5mm | Flange O.D. H(φ):41; Holder Surface Treatment:Clear Anodize; Shape:Flange Type; Bearing I.D. d(mm):8; Volume Discount:Available; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; Flange Shape:Round Type; Days to Ship:7 Days; |
| BA5 / BA 5 Single Row Thrust Ball Bearing 5x12x4mm | G:M6x1; H1:10 mm; C:9.55 kN; A:30 mm; Weight:0.4 kg; L:125 mm; Recommended tightening torque for set screw:3.5 Nm; A1:18 mm; Designation of bearing:US203G2; s1:11 mm; |
| 1.5 Inch Bore ER-24T Insert Ball Bearing | Series:32022X; DD:146.9 mm; B - Cone Width:38.000 mm; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:33900 lbf; WPD:162.5 mm; Aa - Cage-Cone Backface Clearance:2.5 mm; Cone Part Number:X32022X; C90 - Dynamic Radial Rating (90 million revolutions)5:86500 N; R - Cone Backface To Clear Radius3:2.540 mm; K - Factor8:1.36; |
| F17 30.3*41.722*6.16mm Harmonic Drive Wave Generator Bearing | Oil Lubrication - T Seal:2900 rpm; Locking Style:Eccentric; Dimension F:1.56 in; Dimension C:1.00 in; Dimension L:8.65 in; e - Geometry Factor:0.22; Dimension D:6.75 in; Shaft Size Type:Imperial; Grease Lubrication - T Seal:2400 rpm; Dimension G:1.56 in; |
| PE25 Radial Insert Ball Bearing 25x62x32mm | Dimension R:17.2 in; Ca - Axial Load Rating:8183 lbf; Bearing Number:LSE611BR; Dimension P:1.1 in; Maximum Speed:1220 rpm; Bolt Size:4 x M24; Note:This product line wa; Cr - Dynamic Load Rating:117800 lbf; Bearing - Housing - Seal:LSE611BRHRSS; Seal Type:Viton Single Lip; |
SCH2-3/16 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing Video
BS 1088 - Wikipedia
In materials, BS 1088 is the British Standard specification for marine plywood that applies to plywood produced with untreated tropical hardwood veneers that have a set level of resistance to fungal attack. The plies are bonded with Weather Boil Proof (WBP) glue
BS 1088 (Hydrotek) – Midwest Boat Appeal & Marine Plywood
BS 1088 Hydrotek is a multi-ply marine plywood that is superior to all standard Meranti plywood currently produced. Both face and inner plies are constructed from whole piece, color matched, Meranti veneers. Hydrotek is used in boat building applications where only the best will do
Okoume Marine Plywood: BS 1088 Quality - 3mm, 4mm, 6mm
4mm, 5/32", 13 lbs, 3, BS1088. 6mm, 1/4", 21 lbs, 5, BS1088. 9mm, 3/8", 31 lbs, 5, BS1088. 12mm, 1/2", 42 lbs, 7, BS1088. 18mm, 3/4", 62 lbs, 11, BS1088
meranti bs1088 hydrotek 6mm 5 ply marine grade plywood 4
Our BS 1088 is Lloyds certified, the BS 6566 version allows slightly thinner veneers and some filled end splits in the faces, but the same void free core and WBP
Okoume Plywood - BS 1088 Joubert Marine Grade | Marine
Buy Okoume plywood online. High quality Okoume marine grade plywood by Joubert. Meets BS 1088 and Lloyd's Register Type Approved. Shipped nationwide
Hydrotek, Meranti, Bs 1088 Rules 5 Ply 6mm x 4' x 8
Hydrotek Marine Plywood is manufactured utilizing BS 1088 specifications, it is a multiply type construction, with balanced internal plys and thick (1mm before