| No. | Brand | F | C | H | E | L | J | d | i |
| U6U | - | - | - | - | - | - | - | 20 | - |
| 160" | - | - | 9.55 kN | - | - | - | - | 17.46 mm | - |
| 900 | - | - | - | - | - | - | - | 33.34 mm | - |
| 6212 | fag | - | - | - | - | - | - | - | - |
| 3A | - | - | - | 125 mm | - | 68 mm | - | - | - |
| ER20 | Link-Belt | - | 25.7 kN | - | - | 135 mm | 110 mm | - | - |
| 4 | - | - | - | - | - | 117 mm | 92 mm | 35 mm | - |
| 1/2 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 20.5% | INA | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| +.026mm | - | - | - | - | - | - | - | - | - |
| 1/4 | - | - | - | - | - | - | - | 240 mm | - |
| SD8 | - | - | - | - | - | - | - | - | - |
| (BDZ-180) | - | - | - | - | - | - | - | - | - |
| 22209 | - | - | - | - | - | - | - | - | - |
| NUP314 | NSK | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | 20 mm | - |
| ER10 | FAFNIR | - | - | - | - | - | - | - | - |
| 3G | - | - | 9.55 kN | - | - | 264 mm | - | - | - |
| 1/10 | - | - | - | - | - | 120 mm | - | - | - |
| 6205 | fag | - | - | - | 21 mm | - | - | 17 mm | - |
| B40-185 | - | - | - | - | - | - | - | - | - |
| 1.8mm | INA | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| P2nb9-31.5-500-96-Xvi3 | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 12mm, | - | - | - | - | - | - | - | - | - |
| 5] | - | - | 43.55 kN | 63.5 mm | - | - | - | 55 mm | - |
| GRA014-NPP-B-AS2/V Radial Insert Ball Bearing | J:110 mm; A:34 mm; Designation of housing:FC207-; B:42.9 mm; G:M6x1; H3:90; s1:21.45 mm; A2:36.4 mm; Recommended tightening torque for set screw:8 Nm; L:135 mm; |
| 51118 Plane Roll Axial Ball Thrust Bearing For Hardware Accessories 90*120*22mm | N2:32 mm; H2:51 mm; B:31 mm; A1:12 mm; SW:3.18 mm; L3:51 mm; Recommended tightening torque for set screw:3.7 Nm; A5:18.3 mm; s1:15.5 mm; G:M6x1; |
| CSCU080 Thin Section Ball Bearing 203.2x222.25x12.7mm | l1:229 mm; Eye bolt(s):M12; Connection bolts:M16; g:61 mm; oil level:45 mm; d:90 mm; r max:1 mm; d3:M90x2; a:410 mm; g1:40 mm; |
| JU045XP0 Thin Section Ball Bearing 114.3x133.35x12.7mm Bearing | Size Standards:Metric System; Number of Raceway Ring Rows:Single Row; Retainer Type:Punching; Type:Ball; Load Direction:Radial; Bearing Style:Rubber Sealed; D:85; Precision:Grade 0; Types:16**/6*** series; Preload Mark:CM; |
| U Groove Sealed LFR5204-16KDD Bearings 20x52X20.6mm | K - Factor7:1.67; db - Cone Backface Backing Diameter:32.51 mm; B - Cone Width:20.638 mm; D:61.999 mm; Y - ISO Factor9:1.71; Bearing Weight:0.30 Kg; C90 - Dynamic Radial Rating (90 million revolutions)4:3490 lbf; C - Cup Width:14.288 mm; Ab - Cage-Cone Frontface Clearance:1.8 mm; Series:15000; |
| JB035CP0 88.9*104.775*7.9375mm Thin Section Ball Bearing Harmonic Drive Wave Generator | d:10; B:9; Type:Ball; Outer Ring Shape:Flat; Load Direction:Radial; Precision:Grade 0; Retainer Type:Punching; Size Standards:Metric System; Bearing Style:Open Type; Grease symbol:/LP03; |
| KB065AR0 165.1*180.9757.9375mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | Nlim (oil):31,000 rpm; da min:17 mm; Static load, C0:1.26 kN; Dynamic load, C:2.08 kN; B:5 mm; UNSPSC:31171504; Characteristic cage frequency, FTF:0.44 Hz; Snap Ring:No; Enclosure Type:Non-Contact Seal; Precision Class:ABEC 1 | ISO P0; |
| 5209ZZ Axial Double Row Angular Contact Ball Bearings 45*85*30.2mm | H1:25 mm; J:184 mm; L:241 mm; S:14.9 mm; T min.:-20 °C; H2:138 mm; N1:25 mm; T max.:200 °C; Weight:4.8 kg; A1:44 mm; |
SCH1 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing Video