| 70TAC20X+L Thrust Ball Bearing / Angular Contact Bearing 70x110x48mm | Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)5:5650 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9840 lbf; Ab - Cage-Cone Frontface Clearance:0.09 in; B - Cone Width:0.8540 in; C1 - Dynamic Radial Rating (1 million revolutions)6:21800 lbf; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:38000 lbf; db - Cone Backface Backing Diameter:2.01 in; |
| 3802-2RS Double Row Sealed Angular Contact Ball Bearings 15x24x7mm | Bearing:21315; G:M20; C0 Static Load Rating:321; UPC Code:999999999; Shaft Diameter da:75 mm; Locating Rings (width x OD):SR160X14; N1:28 mm; H:194 mm; N:22 mm; Seal:TSNG315; |
| 5203-2RS Double Row Angular Contact Ball Bearings 17*40*17.5mm | Features:Shields; Cr - Dynamic Load Rating:31.2 kN; Bore Size d:45 mm; Outside Ring Width B:19.000 mm; Radius Rs min:1.100 mm; Outside Diameter D:85.000 mm; Oil Reference Speed:12000 rpm; C0r - Static Load Rating:20.3 kN; Clearance:C3; Grease Reference Speed:8200 rpm; |
| RME60-N Four-bolt Flanged Bearing Housing Units | Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):60.3; e - ISO Factor3:0.47; Db - Cup Backface Backing Diameter:171.96 mm; r - Cup Backface To Clear Radius1:3.05 mm; D:185.000 mm; Y - ISO Factor4:1.27; Cg - Geometry Factor:0.106; Series:JP13000; K - Factor2:1.24; |
| 206-XL-KRR Radial Insert Ball Bearing 30x62x24mm | Shape:Flange Type; Bearing Part Number:6000; Holder Surface Treatment:Clear Anodize; Days to Ship:7 Days; Bearing Retained:No; Bearing I.D. d(mm):10; Volume Discount:Available; Flange Shape:Round Type; |
| CSXD070 Thin Section Ball Bearing 177.8x203.2x12.7mm | da max:28 mm; B:14 mm; Da max:42 mm; da min:25 mm; Characteristic outer ring frequency, BPF0:3.08 Hz; Radial clearance class:CN; Static load, C0:6.65 kN; Min operating temperature, Tmin:-25 °C; Max operating temperature, Tmax:110 °C; Dynamic load, C:12.8 kN; |
| D42 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 88.9x132.563x25.4mm | Width T(mm):15; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):12; Lateral Width L(mm):60; Mount Type:Base Face Type; Number of Bearings:Single; Days to Ship:8 Days; Bearing Retained:Yes (with retaining; |
| GLE60-KRR-B Radial Insert Ball Bearing | Width T(mm):40 ～ 70; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Bearing I.D. d(mm):17; Flange O.D. H(φ):66; Number of Bearings:Double; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; RoHS:6; |