| GAY50NPPB Pillow Block Bearings 50x90x22mm | a - Effective Center Location3:-8.6 mm; D:69.850 mm; Bearing Weight:0.5 Kg; Da - Cup Frontface Backing Diameter:65.00 mm; e - ISO Factor8:0.27; Cage Type:Stamped Steel; Db - Cup Backface Backing Diameter:60.96 mm; Cg - Geometry Factor:0.0656; R - Cone Backface To Clear Radius1:2.290 mm; Y - ISO Factor9:2.19; |
| 5208-2RS Double Row Angular Contact Ball Bearings 40*80*30.2mm | Rolling Element:Ball Bearing; Manufacturer Name:NTN; Characteristic outer ring frequency, BPF0:3.09 Hz; Static load, C0:86.5 kN; maximum rpm (oil):4700 rpm; closure type:Single Shield; Weight / Kilogram:3.59; finish/coating:Uncoated; row type & fill slot:Single Row Non-Fill; |
| Stainless Steel Ball AISI440C 4.7625mm G10 | ra max:1 mm; a min:3.07 mm; Characteristic inner ring frequency, BPFI:5.44 Hz; Static load, C0:15.3 kN; Dynamic load, C:25.3 kN; rNs min:0.5 mm; b min:1.9 mm; D1:62.7 mm; Characteristic rolling element frequency, BSF:4.61 Hz; a max:3.28 mm; |
| JHA15XL0 38.1*47.625*6.35mm Thin Section Ball Bearing Thin-walled Deep Groove Ball Bearing Factory | A:38 mm; L:98 mm; A1:25 mm; B:30 mm; Recommended tightening torque for set screw:5.5 Nm; G:R1/8"; T min.:-40 °C; d:30 mm; Designation of housing:PAE206-; H2:82 mm; |
| D3 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 15.875x34.138x14.3mm | L3:38 mm; B:31 mm; T max.:100 °C; L:91 mm; SW:3.18 mm; Weight:0.58 kg; Designation of bearing:UC203-11G2T04; d:17.46 mm; H:65 mm; A2:30 mm; |
| KUC055 2RD Super Thin Section Ball Bearing 139.7x158.75x12.7mm | da max:37 mm; Characteristic outer ring frequency, BPF0:5.24 Hz; Characteristic inner ring frequency, BPFI:7.76 Hz; Fatigue limit load, Cu:6.1 kN; Min operating temperature, Tmin:-40 °C; r1s min:0.6 mm; B:20 mm; Radial clearance class:C3; Category:Bearings; Dynamic load, C:49 kN; |
| 51207 Plane Roll Axial Ball Thrust Bearing For Hardware Accessories 35*62*18mm | Volume Discount:Available; Shape:Flange Type; Type:Bearings with Housin; Width T(mm):50; RoHS:6; Bearing I.D. d(mm):15; Bearing Used:Deep Groove Ball Bea; Bearing Material:Stainless Steel; Number of Bearings:Double; Bearing Retained:No; |
| JU050CP0 127*146.05*12.7mm Thin Section Ball Bearing Thin-walled Deep Groove Ball Bearing Factory | Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Mount Type:Base Face Type; Number of Bearings:Single; Bearing Part Number:606; Holder Surface Treatment:Electroless Nickel P; Shape:T-Shaped; Lateral Width L(mm):47; Width T(mm):12; |