| No. | Brand | F | C | H | E | L | J | d | i |
| 3 | - | - | - | - | - | - | - | 35 | - |
| 41.63030 | Nachi | - | 5.724 in | 0.198 in | 5.281 in | - | - | - | - |
| 368/362 | - | - | - | - | - | - | - | - | - |
| k2 | - | - | - | - | - | - | - | - | - |
| PC50UU, | - | - | - | - | - | - | - | - | - |
| 63152Z | SKF | - | - | - | - | - | - | - | - |
| 6mm | - | - | - | - | - | - | - | - | - |
| 1060 | - | - | - | - | - | - | - | 25.001 mm | - |
| 496 | Bower | - | - | - | - | - | - | - | - |
| ZX330-3 | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/16mm/18mm | - | - | - | - | - | - | - | - | - |
| EX75-3 | - | - | - | - | - | - | - | - | - |
| (420, | - | - | - | - | - | - | - | - | - |
| ER10 | FAFNIR | - | - | - | - | - | - | - | - |
| [10 | - | - | - | - | - | - | - | - | - |
| 215/70R16 | - | - | - | - | - | - | 146 mm | 44.45 mm | - |
| 2.7mm | - | - | - | - | - | - | - | - | - |
| NA4909 | SKF | - | 19.5 kN | 98 mm | - | 274 mm | - | 31.75 mm | - |
| 85BER19STSULP3 | NSK | - | - | - | - | - | - | - | - |
| CB650SC | NTN | - | - | 30.2 mm | - | - | - | - | - |
| 2308-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| LMF45 | - | - | - | - | - | - | - | - | - |
| ZrO2 | - | - | - | - | - | - | - | - | - |
| KD200CP0 508*533.4*12.7mm Thin Section Ball Bearing Harmonic Drive Bearing | H3:70; A1:9 mm; s1:13.5 mm; d:25.4 mm; Designation of housing:FCE205-; C:14 kN; S:7.5 mm; A:20 mm; J:90 mm; C0:7.88 kN; |
| 5217ZZ Axial Double Row Angular Contact Ball Bearings 85*150*49.2mm | J:82.5 mm; e:20 mm; A2:42.2 mm; s1:19.05 mm; A1:12 mm; Designation of housing:FE206N-; Weight:1.16 kg; Recommended tightening torque for set screw:5.5 Nm; C:19.5 kN; L:108 mm; |
| CSEF110 Thin Section Ball Bearing 279.4x317.5x19.05mm | C0:6.65 kN; A:21 mm; A5:18.3 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; H2:41 mm; Designation of bearing:UC203G2T04; G:R1/8"; L:264 mm; SW:3 mm; |
| B12 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 30.163x53.19x19.05mm | Cr - Dynamic Load Rating:5.1 kN; Outside Diameter D:30.000 mm; Oil Limiting Speed:30000 rpm; C0r - Static Load Rating:2.4 kN; Bore Size d:9 mm; Features:Contact Seals; Grease Limiting Speed:25000 rpm; Weight:0.0330 Kg; Radius Rs min:0.600 mm; Outside Ring Width B:10.000 mm; |
| JU047CP0 120.65*139.7*12.7mm Thin Section Ball Bearing Thin-walled Deep Groove Ball Bearing Factory | Grease Lubrication - T Seal:1000 rpm; Dimension D:11.420 in; Int Radial Clearance Reduction Min:0.0025 in; C0 - Static Load:212000 lb; Dimension H:1.26 in; Shaft Tolerance:0.0040 in; Housing Style:Four-Bolt Square Fla; Float:0.083 in; Oil Lubrication - M/N Seal:700 rpm; Grease Lubrication - B/C/O Seal:400 rpm; |
| KG070CP0 177.8*228.6*25.4mm Thin Section Ball Bearings For Harmonic Drive Servo | Seal:Nitrile; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With cast iron cover; Rolling Element Material:Bearing Steel; Surface Treatment:No; Machining:No; Bearing Unit, Type:Pillow Type; |
| GRA014-NPP-B-AS2/V Radial Insert Ball Bearing | J:110 mm; A:34 mm; Designation of housing:FC207-; B:42.9 mm; G:M6x1; H3:90; s1:21.45 mm; A2:36.4 mm; Recommended tightening torque for set screw:8 Nm; L:135 mm; |
| CSXF055 Thin Section Ball Bearing 139.7x177.8x19.05mm | Shape:Flanged Pilot Type; Housing Material:1045 Carbon Steel; Type:Bearings with Housin; RoHS:6; Bearing Part Number:6210; Number of Bearings:Double; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Holder Surface Treatment:Electroless Nickel P; |
SFR2-5ZZEE 3.175X7.938X3.571/4.366 Extended Inner Ring Flanged Bearings Video