| 30 mm x 62 mm x 16 mm 7307 Bearing 35x47x21mm | A1:36 mm; B:51.6 mm; H:55.6 mm; Weight:2.52 kg; Designation of bearing:UC210-31G2T20; C0:23.2 kN; G:M6x1; Designation of housing:PLE210N-; s1:25.8 mm; d:49.21 mm; Size (mm):30 mm x 62 mm x 16 mm ; |
| CSXU070-2RS Thin Section Ball Bearing 177.8x196.85x12.7mm | C Chamfered:Not Provided; Type:Bearings with Housin; Bearing I.D. d(mm):20; Thickness T(mm):45 ～ 50; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; RoHS:6; Holder Surface Treatment:Black Oxide Coating; Bearing Retained:No; |
| 5211-2RS Double Row Angular Contact Ball Bearings 55*100*33.3mm | C - Dynamic Load (Basic):286000 lb; Shaft Size :5-15/16 in; Dimension K:2.99 in; Pre Install Clearance Max:0.0067 in; Y2 - Geometry Factor:3.10; Shaft Size Type:Imperial; Dimension A:0.780 in; Grease Lubrication - M/N Seal:600 rpm; Pre Install Clearance Min:0.0043 in; UPC Code:0883450397469; |
| CSXD060 Thin Section Ball Bearing 152.4x177.8x12.7mm | L:108 mm; B:18 mm; Adapter sleeve reference:HLK2306; A1:13 mm; d1:45 mm; Weight:1.08 kg; A:31 mm; J:83 mm; s1:19.7 mm; Designation of bearing:LK206G2H; |
| S623ZZ 3X10X4MM Stainless Steel Bearing | C:35.1 kN; d:47.62 mm; A2:54.6 mm; S:10.9 mm; Weight:2.2 kg; Recommended tightening torque for set screw:8 Nm; H:197 mm; A1:16 mm; L:115 mm; s1:21.75 mm; |
| CSXA025 Thin Section Ball Bearing 63.5x76.2x6.35mm | Category:Roller Follower; Roller Width B(mm):15; d:12; Material:[Carbon Steel] Carbo; Inner Ring:Presence; Basic Load Rating, Dynamic Rating(kN):13; Roller Type:Cylindrical Outer Ri; Shaft:No; RoHS:6; Basic Load Rating, Static Rating(kN):23; |
| CSCG160 Thin Section Ball Bearing 406.4x457.2x25.4mm | Shape:T-Shaped; Height H(mm):25 ～ 50; Bearing Retained:No; C Chamfered:Not Provided; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6903; Type:Bearings with Housin; Bearing I.D. d(mm):17; Bearing Material:[Steel] Steel; Thickness, Height Indication:T Selection, h Confi; |
| F12-23M Metal Axial Plane Thrust Ball Bearing For Hardware Accessories 12x23x7.5mm | Da max:93.5 mm; Max operating temperature, Tmax:120 °C; da min:71.5 mm; Nlim (grease):6,500 rpm; Characteristic rolling element frequency, BSF:7.87 Hz; Dynamic load, C:30.5 kN; rs min:1.1 mm; Static load, C0:25.2 kN; f0:15.8; Min operating temperature, Tmin:-40 °C; |