| No. | Brand | F | C | H | E | L | J | d | i |
| 08123-62047-000 | - | - | - | - | - | - | - | - | - |
| 61816 | SKF | - | - | - | - | - | - | - | - |
| 15-200470-004 | Parker | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 6008LLH | - | - | - | - | - | - | - | - | - |
| 1975-2007 | koyo | - | - | - | - | - | - | - | - |
| LME406280N, | IKO | - | - | - | - | - | - | 170 | - |
| 6404 | NTN | - | - | 31.8 mm | - | - | 94.5 mm | - | - |
| 37100-0K091 | - | - | - | - | - | - | - | - | - |
| 1217 | Nachi | - | - | - | - | - | - | - | - |
| CRBC25025 | RBC | - | - | - | - | - | - | - | - |
| 6206 | fag | - | - | - | - | - | - | 1.9685 in | - |
| (YH-CD4002) | - | - | 20 mm | - | - | - | - | - | - |
| 705-11-34010 | - | - | - | - | - | - | - | - | - |
| 6212 | fag | - | - | - | - | - | - | - | - |
| 3 | INA | - | - | - | - | - | - | - | - |
| AK46200 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 628 | NSK | - | - | - | - | 236 mm | 184 mm | - | - |
| Valve,Angld,1/4In,Flare-Male | Parker | - | - | - | - | - | - | - | - |
| 21%) | - | - | - | - | - | - | - | - | - |
| NK15/16-XL | INA | - | - | - | - | 57 mm | - | 17 mm | - |
| HK1312 | - | - | - | - | - | - | - | 65 | - |
| 500 | - | - | - | - | - | - | - | - | - |
| NUP315-E-M1 | fag | - | - | - | - | - | - | - | - |
| 120TAC29X+L Thrust Ball Bearing / Angular Contact Bearing 120x165x54mm | Max. Allowed rpm(rpm):11000; D:58; Basic Dynamic Load Rating(N):5350; Size Standards:Metric System; Retainer Type:Punching; Load Direction:Radial; B:7; Type:Ball; Number of Raceway Ring Rows:Single Row; |
| D15 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 34.925x62.713x15.875mm | Type:Bearings with Housin; Flange O.D. H(φ):134; Bearing Part Number:6208; Number of Bearings:Double; Bearing I.D. d(mm):40; Flange Shape:Square Type; Holder Surface Treatment:Black Oxide Coating; RoHS:6; |
| D37 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 69.85x113.513x25.4mm | D3 max:59.61 mm; a min:3.07 mm; Characteristic outer ring frequency, BPF0:3.58 Hz; Ca min:4.67 mm; ra max:1 mm; b min:1.9 mm; Fatigue limit load, Cu:0.51 kN; d:30 mm; B:16 mm; Characteristic inner ring frequency, BPFI:5.42 Hz; |
| CSEA070 Thin Section Ball Bearing 177.8x190.5x6.35mm | d:12.5000 in; Cone Part Number:HM259049DW; da - Cone Frontface Backing Diameter:13.39 in; C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:97800 lbf; R - Cone Frontface To Clear Radius2:0.130 in; K - Factor7:1.74; Cage Type:Pin-Type; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:56000 lbf; Cg - Geometry Factor8:0.186; Ab - Cage-Cone Frontface Clearance:0.21 in; |
| Stainless Steel Ball AISI440C 3.175mm G10 | Bearing Part Number:625; Shape:T-Shaped; Lateral Width L(mm):46; Thickness, Height Indication:T, h Selection; Height H(mm):20 ～ 30; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Thickness T(mm):25 ～ 30; |
| Stainless Steel Ball AISI440C 3.5mm G10 | G2 - Heat Generation Factor (Rib-Roller End):12.1; Cone Part Number:3383; C90 - Dynamic Radial Rating (90 million revolutions)4:6700 lbf; R - Cone Backface To Clear Radius1:0.14 in; T1 - Bearing Width:1.1563 in; Design Units:Imperial; r - Cup Backface To Clear Radius2:0.130 in; C - Cup Width:0.9375 in; Series:3300; Y - ISO Factor9:2.2; |
| B16 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 36.513x62.71x19.05mm | Raceway Ring Shape:Needle Roller; D:85; Outer Ring Type:Flat; Size Standards:Metric System; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Single Row; Sealing Structure:Brim Type; RoHS:6; Precision (JIS):Grade 0; |
| F10-18M Metal Axial Plane Thrust Ball Bearing For Hardware Accessories 10x18x5.5mm | A:6.7 mm; J:63.5 mm; C:9.55 kN; Weight:0.19 kg; L:58.7 mm; A1:4 mm; Designation of housing:PFL203-; A2:16 mm; d:12 mm; Recommended tightening torque for set screw:3.5 Nm; |
CSXD055 Four-point Contact Thin Section Bearing Video