| No. | Brand | F | C | H | E | L | J | d | i |
| S6K | - | - | - | - | - | - | - | - | - |
| 900 | - | - | - | - | - | - | - | 33.34 mm | - |
| Gx120 | INA | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| C50 | NTN | - | - | - | - | 175 mm | - | - | - |
| 7011UCG | NTN | - | - | - | - | - | - | - | - |
| 1973-1974 | Timken | - | - | - | - | - | - | - | - |
| 5129 | - | - | - | - | - | - | - | - | - |
| 513135 | Timken | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | 190 mm | - | - | - | - | - |
| 40-0310 | - | - | - | - | - | - | - | 17 | - |
| 5116 | - | - | - | - | - | - | - | 25 | - |
| 5] | - | - | 43.55 kN | 63.5 mm | - | - | - | 55 mm | - |
| 100ml | - | - | - | - | - | - | - | - | - |
| 6003 | SKF | - | - | - | - | - | - | - | - |
| (JT-A17) | - | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| ct759 | - | - | - | - | - | - | - | - | - |
| 3mm | - | - | 19.5 kN | - | - | - | - | 28.58 mm | - |
| TA1920-Z | IKO | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 304 | - | - | - | - | - | - | - | 60 | - |
| B71840C.TPA.P4.UL | - | - | - | - | - | - | - | - | - |
| Stainless Steel Ball AISI440C 4.7625mm G10 | ra max:1 mm; a min:3.07 mm; Characteristic inner ring frequency, BPFI:5.44 Hz; Static load, C0:15.3 kN; Dynamic load, C:25.3 kN; rNs min:0.5 mm; b min:1.9 mm; D1:62.7 mm; Characteristic rolling element frequency, BSF:4.61 Hz; a max:3.28 mm; |
| RME60-N Four-bolt Flanged Bearing Housing Units | Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):60.3; e - ISO Factor3:0.47; Db - Cup Backface Backing Diameter:171.96 mm; r - Cup Backface To Clear Radius1:3.05 mm; D:185.000 mm; Y - ISO Factor4:1.27; Cg - Geometry Factor:0.106; Series:JP13000; K - Factor2:1.24; |
| CSXG200 Thin Section Ball Bearing 508x558.8x25.4mm | s1:27.8 mm; Z:28.7 mm; H2:128 mm; T min.:-20 °C; B:55.6 mm; Recommended tightening torque for set screw:22 Nm; H1:23.2 mm; A1:39.5 mm; G:M6x1; Weight:3.42 kg; |
| 50 mm x 90 mm x 23 mm CSXD180 Four-point Contact Thin Section Bearing | Precision:Grade 0; RoHS:6; Holder Symbol:No; Seal, Shield Symbols:ZZ; Combination symbol:No; Low Torque Specification:No; Acoustic Symbol:No; Special Configurations Code:No; Accuracy(Class):Class 0; Width(mm):21; Size (mm):50 mm x 90 mm x 23 mm ; |
| KG045CP0 114.3*165.1*25.4mm Thin Section Ball Bearings For Harmonic Drive Servo | d:55 mm; N:M16; H2:125 mm; Z:77 mm; Recommended tightening torque for set screw:22 Nm; Dz:110 mm; G:M6x1; L:140 mm; Designation of closed end cover:SCC211; H:63.5 mm; |
| KC180AR0 Thin Section Ball Bearing | N:M8; H:33.3 mm; T max.:100 °C; S:12.7 mm; Designation of bearing:UC204-12G2L3; C:12.8 kN; A1:20 mm; H2:64 mm; Recommended tightening torque for set screw:3.7 Nm; J:49 mm; |
| KF080CP0 203.2*241.3*12.7mm Thin Section Ball Bearing Hollow Shaft Rotary Actuator | Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; D:5.8437 in; Series:42000; Cup Part Number:42586; e - ISO Factor2:0.49; Db - Cup Backface Backing Diameter:5.24 in; C - Cup Width:1.2500 in; Cg - Geometry Factor:0.139; Y - ISO Factor3:1.22; |
| B20 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 42.863x75.41x22.22mm | L1:48 mm; N1:16 mm; S:6.5 mm; G:M6x1; Designation of bearing:ES201G2T20; N:12mm; d1:27.2 mm; d:12 mm; Recommended tightening torque for set screw:5.5 Nm; T max.:200 °C; |
GYE20KRRB Pillow Block Bearings 20x47x14mm Video