| KC075AR0 Thin Section Ball Bearing | Flange Shape:Square Type; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; Shape:Flange Type; Flange O.D. H(φ):41; Bearing Retained:No; Width T(mm):25 ～ 50; Bearing Material:[Steel] Steel; Holder Surface Treatment:Electroless Nickel P; Type:Bearings with Housin; |
| BA3 / BA 3 Single Row Thrust Ball Bearing 3x8x3.5mm | C90 - Dynamic Radial Rating (90 million revolutions)5:166000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:640000 lbf; C0 - Static Radial Rating:1800000 lbf; Ab - Cage-Cone Frontface Clearance:0.17 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:140000 lbf; K - Factor8:1.19; B - Cone Width:4.0000 in; a - Effective Center Location4:5.03 in; d:40.0000 in; Cg - Geometry Factor:0.402; |
| KUC070 2RD Super Thin Section Ball Bearing 177.8x196.85x12.7mm | da min:19 mm; Characteristic outer ring frequency, BPF0:3.14 Hz; Min operating temperature, Tmin:-20 °C; Mass:0.03 kg; Dynamic load, C:6.8 kN; Nlim (oil):24,000 rpm; Characteristic rolling element frequency, BSF:4.47 Hz; Da max:33 mm; Static load, C0:3.35 kN; f0:13.6; |
| CSXU110-2RS Four-point Contact Thin Section Bearing | N:12mm; Recommended tightening torque for set screw:11.5 Nm; J:83 mm; B1:48.3 mm; S:18.2 mm; T max.:100 °C; A:31 mm; C0:11.2 kN; A1:13 mm; C:19.5 kN; |
| Stainless Steel Ball AISI440C 3.5mm G10 | G2 - Heat Generation Factor (Rib-Roller End):12.1; Cone Part Number:3383; C90 - Dynamic Radial Rating (90 million revolutions)4:6700 lbf; R - Cone Backface To Clear Radius1:0.14 in; T1 - Bearing Width:1.1563 in; Design Units:Imperial; r - Cup Backface To Clear Radius2:0.130 in; C - Cup Width:0.9375 in; Series:3300; Y - ISO Factor9:2.2; |
| 3904-2RS Double Row Sealed Angular Contact Ball Bearings 20x37x13mm | A:32 mm; N1:19 mm; s1:30.5 mm; d:20 mm; H1:14.5 mm; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm; L:130 mm; Designation of bearing:EX204G2T20; H:33.3 mm; |
| CSXG180 Four-point Contact Thin Section Bearing | d:17; Pillow Type, Category:Centre Height; Bearing Unit, Type:Pillow Type; Stroke:No; Grease Type:Standard Grease; Diameter series symbol:Used for Light load; Days to Ship:6 Days; Unit Body Material:Cast Iron; Surface Treatment:No; |
| GNE70-KRR-B-FA107 Radial Insert Ball Bearing | Basic Load Rating, Dynamic Rating(N):330000; Shaft Bore Config.:Tapered hole; Load Direction:Radial; Raceway Ring Shape:Self-aligning roller; D:160; B:55; Retainer Type:Punching; Bearing Ring:With Oil Hole, Oil G; d:75; RoHS:6; |