| No. | Brand | F | C | H | E | L | J | d | i |
| H26033047 | - | - | - | 36.5 mm | 18 mm | 75 mm | - | - | - |
| 2x5x2.3 | INA | - | - | 80 mm | - | - | - | - | - |
| 1220*2440*3-25mm | INA | - | 25.7 kN | - | - | 166 mm | - | 35 mm | - |
| 305 | NSK | - | - | 240 mm | - | 140 mm | - | - | - |
| 24 | - | - | 52.5 kN | - | - | - | - | 61.91 mm | - |
| 13 | - | - | - | - | - | - | - | - | - |
| 21%) | - | - | - | - | - | - | - | - | - |
| 22319EK | - | - | - | - | - | - | - | 65 mm | - |
| 9x17x5mm | - | - | - | 102 mm | - | 129 mm | - | 35 mm | - |
| 6021C3 | NTN | - | - | - | - | - | - | - | - |
| 23036 | - | - | - | - | - | - | - | - | - |
| 2312 | Nachi | - | - | - | - | - | - | - | - |
| LBE16OP | IKO | - | - | 47.6 mm | - | 110 mm | - | - | - |
| 3 | - | - | - | - | - | - | - | 35 | - |
| (15x42x13) | - | - | - | - | - | - | - | - | - |
| 7901AC | - | - | - | - | - | - | - | - | - |
| 18w | - | - | - | - | - | - | - | - | - |
| 351080 | INA | - | - | - | - | - | - | - | - |
| 5X7X9X | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | 156 mm | - | - | - | - | - |
| 1000pcs | - | - | 25.7 kN | - | - | 135 mm | - | 28.58 mm | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| 450 | - | - | 25.7 kN | 47.6 mm | 20 mm | - | - | 34.92 mm | - |
| 2018 | - | - | - | 69.9 mm | 25 mm | - | - | 61.91 mm | - |
| D3 Thrust Ball Bearing 15.96*34*14.3mm | RoHS:6; O.D. D(φ):37; I.D. d(φ):31; Application:For Outer Ring; L(mm):3 ～ 100; L Dimension Tolerance:Negative Tolerance; Material:5052 Aluminum Alloy; Days to Ship:7 Days; |
| RME60-N Four-bolt Flanged Bearing Housing Units | Design Units:METRIC; G2 - Heat Generation Factor (Rib-Roller End):60.3; e - ISO Factor3:0.47; Db - Cup Backface Backing Diameter:171.96 mm; r - Cup Backface To Clear Radius1:3.05 mm; D:185.000 mm; Y - ISO Factor4:1.27; Cg - Geometry Factor:0.106; Series:JP13000; K - Factor2:1.24; |
| F20 35.56*49.073*7.24mm Harmonic Drive Wave Generator Bearing | RoHS:6; Bearing Retained:Yes (with retaining; Shape:Flanged Pilot Type; Flange Shape:Round Type; Volume Discount:Available; Width T(mm):13; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Single; |
| KB080AR0 203.2*219.075*7.9375mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | C0r - Static Load Rating:96.8 kN; Features:O.D. Groove; Oil Reference Speed:5900 rpm; Clearance:C0 (Normal); Grease Reference Speed:4100 rpm; Weight:3.15 Kg; Cr - Dynamic Load Rating:105 kN; Bore Size d:130 mm; Outside Ring Width B:33.000 mm; Radius Rs min:2.000 mm; |
| JU047XP0 120.65*139.7*12.7mm Thin Section Ball Bearing Harmonic Drive Actuator | Days to Ship:10 Days; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):29100; Bearing Unit, Type:Pillow Type; Bearing Inner Dia. Shape:Cylindrical Bore Set; Pillow Type, Category:Narrow Width; Surface Treatment:No; Grease Type:SH44M; |
| D1 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 12.7x30.963x14.3mm | e - ISO Factor3:0.36; Reference Thermal Speed Rating (Grease):100; Reference Thermal Speed Rating (Oil)7:110; Da - Outer Ring Backing Diameter:1114.000 mm; Cage Type:YMD; C0 - Static Radial Rating:38700000 N; C1(2) - Dynamic Radial Rating (Two-Rows):19800000 N; D:1220.000 mm; R - Inner Ring To Clear Radius1:7.000 mm; Design Unit:METRIC; |
| BBY-0079 Insert Ball Bearing For Texturing Machine | d1:55 mm; H:110 mm; Designation of bearing:EX307-20G2; B1:51.6 mm; A5:19.8 mm; A:32 mm; G:M6x1; s1:36.55 mm; Recommended tightening torque for set screw:8 Nm; C:33.5 kN; |
| CSXF060 Thin Section Ball Bearing 152.4x190.5x19.05mm | Diameter (mm)(mm):2; Size Unit:mm; Material:440C Stainless Steel; Days to Ship:6 Days; |
RSAO80 Plummer Block Housing Units Video