| CSCF100 Thin Section Ball Bearing 254x292.1x19.05mm | A1:13 mm; S:22.2 mm; Weight:4.11 kg; s1:27.8 mm; Designation of housing:FC211N-; B:55.6 mm; T min.:-20 °C; Recommended tightening torque for set screw:16.8 Nm; e:13 mm; T max.:100 °C; |
| SCH2 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing | Dynamic load, C:14 kN; Nlim (grease):13,000 rpm; Radial clearance class:C3; Brand:NTN; ra max:1 mm; Characteristic outer ring frequency, BPF0:3.58 Hz; Characteristic rolling element frequency, BSF:4.71 Hz; B:15 mm; Characteristic cage frequency, FTF:0.4 Hz; Fatigue limit load, Cu:0.36 kN; |
| B36 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 68.263x110.34x28.58mm | Bearing Type:Split Cylindrical Re; Series Type:Light Series; Note:This product line wa; Seal Type:Felt Seal; Dimension H:1.1 in; Shaft Size:1.75 in; Maximum Speed:4630 rpm; Cor - Static Load Rating:19558 lbf; Ca - Axial Load Rating:809.30 lbf; Cr - Dynamic Load Rating:18659 lbf; |
| B1 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 12.7x30.956x15.88mm | Dimension D:0.19 in; Y2 - Geometry Factor:4.40; Dimension F:4.531 in; Oil Lubrication - M/N Seal:2200 rpm; Grease Lubrication - B/C/O Seal:1600 rpm; UPC Code:0883450043007; Eng Internal Radial Clearance - Max:0.0026; Locking Style:Single Concentric; Pre Install Clearance Max:0.0026 in; Shaft Size :2-1/4 in; |
| 1.4375 Inch Bore ER-23T Insert Ball Bearing | da min:257 mm; k:12 mm; B:160 mm; Characteristic outer ring frequency, BPF0:8.64 Hz; Characteristic inner ring frequency, BPFI:11.36 Hz; Characteristic cage frequency, FTF:0.43 Hz; b:19.37 mm; Static load, C0:3,990 kN; Min operating temperature, Tmin:-40 °C; Y2:2.86; |
| CSCG075 Thin Section Ball Bearing 190.5x241.3x25.4mm | R - Inner Ring To Clear Radius1:5.000 mm; Y1 - ISO Factor5:4.87; Cage Material:Brass; Cg - Geometry Factor8:0.1173; C0 - Static Radial Rating:11700000 N; r - Outer Ring To Clear Radius2:5.000 mm; Y0 - ISO Factor4:3.27; Da - Outer Ring Backing Diameter:811.000 mm; B - Inner Ring Width:200 mm; B - Outer Ring Width:200.000 mm; |
| JA047XP0 120.65*133.35*6.35mm Thin Section Ball Bearing Harmonic Drive Robot Arm Bearing | T max.:200 °C; A:61 mm; N:25mm; A1:25 mm; C0:68 kN; e:36 mm; T min.:-20 °C; B1:92.1 mm; C:104.26 kN; s1:64.35 mm; |
| JB060XP0 152.4*168.275*7.9375mm Thin Section Ball Bearing Harmonic Drive Wave Generator | Seal Type:Kevlar Packing Seal; Bearing Number:LSE404BX; Support Type:Round Flange; Dimension H:3.6 in; Dimension T:15.0 in; Note:This product line wa; Dimension P:0.9 in; Series Type:Light Series; Cor - Static Load Rating:95993 lbf; Shaft Size:4.25 in; |