| KG070CP0 177.8*228.6*25.4mm Thin Section Ball Bearings For Harmonic Drive Servo | Seal:Nitrile; Unit, Type:Insert Bearing Unit; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Accessory:With cast iron cover; Rolling Element Material:Bearing Steel; Surface Treatment:No; Machining:No; Bearing Unit, Type:Pillow Type; |
| 40 mm x 80 mm x 18 mm RSAO70 Plummer Block Housing Units | Recommended tightening torque for set screw:3.7 Nm; N:13mm; C:14 kN; A:38 mm; C0:7.88 kN; H1:16 mm; J:105 mm; T max.:100 °C; d:22.22 mm; G:M6x1; Size (mm):40 mm x 80 mm x 18 mm ; |
| KB180AR0 457.2*473.075*7.9375mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | C:31.85 kN; d:41.28 mm; T max.:100 °C; C0:20.8 kN; T min.:-40 °C; Weight:1.55 kg; S:10.2 mm; H:110 mm; A5:31 mm; SW:3.97 mm; |
| B11 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 28.575x53.19x19.05mm | Dynamic load, C:6.1 kN; Characteristic outer ring frequency, BPF0:2.62 Hz; Max operating temperature, Tmax:120 °C; Mass:0.04 kg; da min:16 mm; Fatigue limit load, Cu:0.13 kN; f0:12.7; Da max:28 mm; Static load, C0:2.75 kN; d:12 mm; |
| MR105 ZZ 5X10X4MM Deep Groove Ball Bearing | Radial clearance class:CN; Static load, C0:44.5 kN; Nlim (grease):2,000 rpm; Fatigue limit load, Cu:1.61 kN; Min operating temperature, Tmin:-25 °C; Characteristic cage frequency, FTF:0.47 Hz; Characteristic inner ring frequency, BPFI:13.85 Hz; rs min:1.1 mm; da min:146.5 mm; Characteristic rolling element frequency, BSF:15.2 Hz; |
| SCH1-3/8 Self-Lube Cast Iron Hanger Bearing Units Pillow Block Bearing | Design Units:Imperial; db - Cone Backface Backing Diameter:17.72 in; B - Cone Width:2 in; C1 - Dynamic Radial Rating (1 million revolutions)6:178000 lbf; R - Cone Backface To Clear Radius3:0.13 in; a - Effective Center Location4:1.02 in; Cage Type:Pin-Type; C0 - Static Radial Rating:396000 lbf; da - Cone Frontface Backing Diameter:17.52 in; C90 - Dynamic Radial Rating (90 million revolutions)5:46200 lbf; |
| CSEAA010-TV Thin Section Ball Bearing 25.4x34.925x4.763mm | Width T(mm):13; Shape:Flange Type; Volume Discount:Available; Number of Bearings:Single; Type:Bearings with Housin; RoHS:6; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):30; |
| CSEB042 Thin Section Ball Bearing 107.95x123.825x7.938mm | Da - Cup Frontface Backing Diameter:2.80 in; Series:LM501300; Design Units:Imperial; Db - Cup Backface Backing Diameter:2.64 in; C - Cup Width:0.5800 in; Cg - Geometry Factor:0.0739; Cup Part Number:LM501310; Y - ISO Factor3:1.5; e - ISO Factor2:0.4; D:2.8910 in; |