| KA045CP0 114.3*127*6.35mm Thin Section Ball Bearings , Harmonic Reducer Bearing | Characteristic cage frequency, FTF:0.4 Hz; D4 max:46.3 mm; Db min:47 mm; Characteristic rolling element frequency, BSF:4.76 Hz; Min operating temperature, Tmin:-20 °C; b min:1.35 mm; Static load, C0:5.05 kN; Snap ring reference:R42; Ca max:3.18 mm; rNs min:0.5 mm; |
| 208-XL-KRR Radial Insert Ball Bearing 40x80x27mm | db min:72 mm; ra max:2 mm; Y2:2.5; Nlim (grease):3,800 rpm; Dynamic load, C:97 kN; Static load, C0:32.5 kN; B:48 mm; Max operating temperature, Tmax:120 °C; da max:84 mm; d:65 mm; |
| B11 Thrust Ball Bearing / Axial Deep Groove Ball Bearing 28.575x53.19x19.05mm | Dynamic load, C:6.1 kN; Characteristic outer ring frequency, BPF0:2.62 Hz; Max operating temperature, Tmax:120 °C; Mass:0.04 kg; da min:16 mm; Fatigue limit load, Cu:0.13 kN; f0:12.7; Da max:28 mm; Static load, C0:2.75 kN; d:12 mm; |
| JU040XP0 Thin Section Ball Bearing 101.6x120.65x12.7mm Bearing | B:128 mm; Brand:SNR; Number of lubrication holes:3; rs min:4 mm; b:18.8 mm; Fatigue limit load, Cu:173 kN; Max operating temperature, Tmax:200 °C; Dynamic load, C:2,250 kN; da min:217 mm; Characteristic outer ring frequency, BPF0:7.62 Hz; |
| KD080CP0 203.2*228.6*12.7mm Thin Section Ball Bearing Harmonic Drive Bearing | G1 - Heat Generation Factor (Roller-Raceway)7:440; Y - ISO Factor1:1.78; Y2 - ISO Factor6:2.99; Series:48600; r - Cup Frontface To Clear Radius2:0.03 in; C - Double Cup Width:2.875 in; Da - Cup Frontface Backing Diameter:7.61 in; Design Units:Imperial; e - ISO Factor4:0.34; Cg - Geometry Factor8:0.126; |
| JA047XP0 120.65*133.35*6.35mm Thin Section Ball Bearing Harmonic Drive Robot Arm Bearing | T max.:200 °C; A:61 mm; N:25mm; A1:25 mm; C0:68 kN; e:36 mm; T min.:-20 °C; B1:92.1 mm; C:104.26 kN; s1:64.35 mm; |
| CSEG090 Thin Section Ball Bearing 228.6x279.4x25.4mm | G:M6x1; L:70 mm; s1:11 mm; L1:20 mm; d:12.7 mm; T max.:200 °C; S:6 mm; A:36 mm; H1:10 mm; C0:4.78 kN; |
| KA040AR0 101.6*114.3*6.35mm Thin Section Ball Bearing For Harmonic Reducer Wave Generator Bearing | C - Double Cup Width:4.9375 in; Y1 - ISO Factor5:1.74; Cg - Geometry Factor7:0.116; D:10.5625 in; Da - Cup Frontface Backing Diameter:9.83 in; Series:107000; e - ISO Factor4:0.39; Y2 - ISO Factor6:2.59; Y - ISO Factor1:1.55; r - Cup Frontface To Clear Radius2:0.06 in; |