| HC71919E.T.P4S Spindle Bearing 95x130x18mm | finish/coating:Uncoated; bore type:Round; overall length:7.2500 in; lubrication type:Lubrication Fitting; d:1.5000 in; base to bore centerline:2.1300 in; D:5.18 to 5.88 in; expansion type:Non-Expansion Bearin; series:P2B; overall height:4.1900 in; |
| ZSB1910E Spindle Bearing 50x72x12mm | cage material:Steel; maximum rpm:3530 RPM; D:120 mm; inner ring width:2.4375 in; d:2.4375 in; outer ring width:0.8661 in; B:2-7/16 in; bore type:Round; series:SM-S; snap ring included:Without Snap Ring; |
| 20TAC47BDTDC10PN7B Ball Screw Support Ball Bearing 20x47x45mm | locking device:Set Screw; duty type:Normal Duty; seal type:Contact/Lip; D:4-25/32" t; radial static load capacity:3460 lbf; lubrication type:Lubrication Fitting; housing material:PBT Thermoplastic; expansion type:Non-Expansion Bearin; bolt size:1/2; radial dynamic load capacity:5820 lbf; |
| 17TAC47BDDGDBBC10PN7B Ball Screw Support Ball Bearing 17x47x60mm | Availability:In Stock; B:102mm; d:140mm; Grease Limiting Speed (r/min):1200; Static Load Rating (kN):1590; Oil Limiting Speed (r/min):1500; SKU:22328came4c3-nsk; Weight:35.40 KGS; Cage Type:Brass; Dynamic Load Rating (kN):1160; |
| 25,000 mm x 52,000 mm x 15,000 mm HC707C.T.P4S Spindle Bearing 7x19x6mm | overall height:4-1/2 in; seal type:Contact with Slinger; slot spacing:3.3125 in; housing material:Cast Iron; overall length:5-11/16 in; slot width:0.3125 in; dynamic load capacity:7980 lbf; locking device:Set Screw; rod hole diameter:1-1/8 in; d:2.0000 in; Size (mm):25,000 mm x 52,000 mm x 15,000 mm ; |
| 35BER20XV1V Angular Contact Ball Bearing 35x62x17mm | Fatigue Load Rating (kN):2.2; Cage Type:Steel; Weight:0.02 KGS; Reference Speed Rating (r/min):9500; SKU:6216-2z/c3-skf; Clearance:C3; B:26mm; D:140mm; Dynamic Load Rating (kN):72.8; Limiting Speed Rating (r/min):4800; |
| 10 mm x 26 mm x 8 mm PC28520009CS Angular Contact Ball Bearing 28x52x9mm | lubrication hole type:Lubrication Groove &; series:230; cage material:Brass; static load capacity:4550000 N; operating temperature range:-40 to 120 ºC; bearing material:Through Hardened Ste; d:340 mm; fillet radius:5 mm; bore type:Tapered 1:12; dynamic load capacity:2310000 N; Size (mm):10 mm x 26 mm x 8 mm ; |
| 71914ACE/P4A Bearings 70x100x16mm | material:Rubber; compatible housed unit:538, USAF 538, USAF; end cap type:Open End Cap; compatible bore diameter:7 in, 6-15/16 i; series:500; |