| FAG 522008 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | db - Cone Backface Backing Diameter:2.05 in; Ab - Cage-Cone Frontface Clearance:0.07 in; d:1.5748 in; a - Effective Center Location4:-0.25 in; Aa - Cage-Cone Backface Clearance:0 in; Cage Type:Stamped Steel; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9560 lbf; R - Cone Backface To Clear Radius3:0.14 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:36900 lbf; K - Factor8:2.14; |
| SKF 350901C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | C0 - Static Radial Rating:5580 N; d:30 mm; Ce - Dynamic Radial Rating1:9040 N; Bearing Width:9 mm; da - Inner Ring Backing Diameter:33.900 mm; Bearing Weight:0.05 Kg; r - Outer Ring To Clear Radius3:0.3 mm; Design Units:METRIC; Cage Type:CR - Phenolic Outer; Da - Outer Ring Backing Diameter:43.700 mm; Ball Type:Ceramic; R - Inner Ring To Clear Radius2:0.3 mm; D:47 mm; Contact Angle:25 º; do - Ball Diameter:4.762500 mm; |
| FAG 513828 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Radial Clearance:0.060 to 0.100 mm; Groove Width A:8 mm; Configuration:Double Row; D:170 mm; Constant e:0.24; Nr. of Holes:4; Axial Load Factor Y1:2.76; Limiting Speed - Grease:3,300 rpm; B:43 mm; Hole Diameter (do):5 mm; Axial Load Factor Y2:4.11; Enclosure:Open; Roller Profile:Symmetric; Weight:4.240 kg; da (min):107 mm; d:95 mm; Limiting Speed - Oil:4,000 rpm; Retainer Material:Pressed Steel; Da (max):158 mm; |
| 519330Y DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Bearing Type:Ball Bearing; Inner Ring Width B:34.92 mm; Radius r:0.6 mm; Outside Ring Width C:15.000 mm; Material:Bearing Steel; Angle between Set Screws:90 º; Bore Type:Cylindrical bore; Number of Set Screws:2; Dynamic Load Rating:3490 lbf; Dimension S1:26.9 mm; Center of Bearing from End S:17.5 mm; Dimension B1:1.748 in; O.D. Type:Cylindrical OD; Set Screw Size:1/4-20; Lubrication Type:Non-Relubricatable; |
| NSK 320TFD4701 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | B:17 mm; Enclosure:Snap Ring Groove wit; ra (max):1 mm; D1 (max):62.6 mm; r1:0.5 mm; Snap Ring Outside Diameter:70.7 mm; Limiting Speed - Oil:12,000 rpm; Limiting Speed - Grease:11,000 rpm; a (max):3.3 mm; Cy (max):4.6 mm; d:32 mm; D:65 mm; Radial Clearance:0.015 to 0.033 mm; Dx (min):71.5 mm; Fillet Radius/Chamfer:1 mm; Weight:0.230 kg; b (min):1.9 mm; Factor fo:13.6; Configuration:Single Row; Bore Type:Cylindrical Bore; |
| NTN CRTD4803 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Note:This product line wa; Shaft Size:270 mm; Bearing Type:Split Cylindrical Ex; Dimension N:23.750 in; Dimension L:11.5 in; Dimension H:6.3 in; Dimension V:0.2 in; Series Type:Medium Series; Dimension T:30.0 in; Bearing Number:MSM270BX; Cr - Dynamic Load Rating:331818 lbf; Cor - Static Load Rating:529875 lbf; Maximum Speed:670 rpm; Bearing - Housing - Seal:MSM270BXHKPS; Seal Type:Kevlar Packing Seal; |
| 547584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Shaft Size:7.5 in; Dimension J2 :22-1/2 in; Dimension H :8-1/4 in; Cor - Static Load Rating:222676 lbf; Bearing UPC:013992027559; Bearing Type:Split Cylindrical Ex; Dimension M :8 in; Note:This product line wa; Support Type:Four-Bolt Plummer Bl; Seal Type:Aluminium Triple Lab; Dimension L :29-3/8 in; Cr - Dynamic Load Rating:136576 lbf; Bolt Size:4 x 1-1/4; Bearing Number:LSE708BX; |
| NSK 460TFD6801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Series:14000; da - Cone Frontface Backing Diameter:37.08 mm; r - Cup Backface To Clear Radius2:2.29 mm; G2 - Heat Generation Factor (Rib-Roller End):13.3; Cup Part Number:14284; C1 - Dynamic Radial Rating (1 million revolutions)5:14500 lbf; Aa - Cage-Cone Backface Clearance:0.5 mm; R - Cone Backface To Clear Radius1:0.760 mm; Bearing Weight:0.4 Kg; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:2470 lbf; |
| NSK 180TFD2801 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cup Part Number:LM501310; B:19.561 mm; D:73.431 mm; d:41.275 mm; Cone Part Number:LM501349HP; C0 - Static Radial Rating:16700 lbf; Db - Cup Backface Backing Diameter:67.06 mm; Design Units:Imperial; Series:LM501300; C90 - Dynamic Radial Rating (90 million revolutions)4:4360 lbf; a - Effective Center Location3:-3.3 mm; C - Cup Width:14.732 mm; Da - Cup Frontface Backing Diameter:71.10 mm; e - ISO Factor8:0.4; |
| NTN CRTD5317 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:140 mm; Aa - Cage-Cone Backface Clearance:2 mm; Cage Type:Stamped Steel; r - Cup Backface To Clear Radius2:3 mm; B - Cone Width:27.000 mm; C - Cup Width:21.000 mm; T - Bearing Width to Flange:13.000 mm; a - Effective Center Location3:11.9 mm; C1 - Cup Flange Width:5.000 mm; R - Cone Backface To Clear Radius1:3 mm; D:195.000 mm; Cup Part Number:JP14010-B; Cone Part Number:JP14049; G1 - Heat Generation Factor (Roller-Raceway)10:220; |