| L6-29P9ZD Rotek Slewing Ring Bearings | Da max.:138 mm; Weight:4,22 Kg; Bore Diameter (mm):70; (Grease) Lubrication Speed:2 700 r/min; Withdrawal Sleeve:Not Applicable; ra max.:2 mm; Manufacturer Name:NTN; r min.:2,1 mm; Calculation factor (e):0,37; (Oil) Lubrication Speed:3 500 r/min; Outside Diameter:5.906 Inch | 150 Mil; UNSPSC:31171510; Rolling Element:Spherical Roller Bea; d:70 mm; Internal Clearance:C0-Medium; Long Description:70MM Straight Bore;; |
| RKS.061.25.1754 SKF Slewing Ring Bearings | r2 min.:1 mm; Mass plain bearing:2.06 kg; Specific dynamic load factor K:300 N/mm²; rb - max.:1 mm; Specific static load factor K0:500 N/mm²; Specific factor dinamic load - K:300 N/mm2; da max.:67 mm; Bearing number:GEH 60 TXE-2LS; da - max.:67 mm; r2 - min.:1 mm; rb max.:1 mm; d:60 mm; Design (sliding contact surface combination):Steel/PTFE fabric; Specific factor static load - K0:500 N/mm2; |
| L9-38N9Z Rotek Slewing Ring Bearings | Calculation factor - Y2:0.87; Preload class C GC:870 N; Gref:5.3 cm3; Calculation factor - f2B:1.03; Static axial stiffness, preload class B:200 N/µm; D:95 mm; Attainable speed for oil-air lubrication:33000 r/min; Calculation factor - fHC:1.01; Preload class B - GB:440 N; d1:72.74 mm; Basic dynamic load rating - C:16.3 kN; Da max.:89 mm; da min.:66 mm; d2:70.6 mm; Basic dynamic load rating C:16.3 kN; |
| L6-25E9Z Rotek Slewing Ring Bearings | Y - ISO Factor3:1.1; r - Cup Backface To Clear Radius1:0.030 in; Cup Part Number:M88012; Cg - Geometry Factor:0.0771; Da - Cup Frontface Backing Diameter:2.56 in; Series:M88000; C - Cup Width:0.6875 in; D:2.6875 in; Db - Cup Backface Backing Diameter:2.32 in; Design Units:Imperial; e - ISO Factor2:0.55; |
| RKS.302070202001 SKF Slewing Ring Bearings | Calculation factor (e):0,34; Da min:180 mm; Db:191 mm; r1 min.:3,2 mm; db:138 mm; C:38,1 mm; da:144 mm; T:46,038 mm; d:127 mm; D:203,2 mm; Width (mm):46,038; Da:183 mm; rb max.:3,2 mm; Weight:5,64 Kg; Da max.:191 mm; Calculation factor (Y0):0,96; Outer Diameter (mm):203,2; ra max.:3,6 mm; Basic static load rating (C0):561 kN; db max.:148 mm; |
| A6-9P4 Rotek Slewing Ring Bearings | Bearing number:GE200XT/X-2RS; Material:Inner ring and outer; Max. shaft corner radius, or 45 deg. chamfer (ch1):1.100; Max. housing corner radius, or 45 deg. chamfer (ch):1.100; Bore Diameter (mm):200; Inner Width (Bi):130.0000; Bore Dia (d):200.0000; Outer Dia (D):290.0000; Weight (g):28,400.00; Outer Width (Bo):100.0000; Static Load Rating (Cor):9,000,000; Dynamic Load Rating (Cr):3,750,000; Outer Diameter (mm):290; |
| A10-35P1A Rotek Slewing Ring Bearings | K - Factor7:1.34; G1 - Heat Generation Factor (Roller-Raceway)10:195; R - Cone Backface To Clear Radius1:0.06 in; Cg - Geometry Factor11:0.151; Bearing Weight:2.6 lb; Y - ISO Factor9:1.38; C1 - Dynamic Radial Rating (1 million revolutions)5:23700 lbf; C0 - Static Radial Rating:46400 lbf; D1 - Flange Outer Diameter:6.4647 in; G2 - Heat Generation Factor (Rib-Roller End):139; r - Cup Backface To Clear Radius2:0.06 in; |
| RKS.062.25.1204 SKF Slewing Ring Bearings | Weight:0.38 Kg; Outer Diameter (mm):72; Bore Diameter (mm):35; Size (mm):35x72x32.9; Thread (G):M8×1; S1:24.4 mm; B:32.9 mm; r:2 mm; S:8.5 mm; S2:6 mm; Width (mm):32.9; Basic dynamic load rating (C):25,9 kN; D:72 mm; d1:48 mm; d:35 mm; Bearing number:B7; C:17 mm; |
| L6-16P9ZD Rotek Slewing Ring Bearings | A:0,0020 / Factor min.; D2:18 mm; T1:13 mm; T:11,6 mm; Size (mm):10x28x13; da min:20 mm; nG:10900 1/min / Limiti; C:3,5 mm; Outer Diameter (mm):28; m:0,028 kg / Weight; m1:0,01 kg / Weight, se; ra max:0,6 mm; d1:26 mm; d:10 mm; D3:28 mm; Cua:760 N / Fatigue lim; D1:12 mm; C0a:17000 N; rmin:0,6 mm; |
| L6-29N9Z Rotek Slewing Ring Bearings | Bore Diameter (mm):35; Width (mm):17; d:35 mm; Outer Diameter (mm):72; C:17 mm; Bearing number:Q207; B1:17 mm; D:72 mm; Size (mm):35x72x17; |