| RKS.162.16.1534 SKF Slewing Ring Bearings | C0a:600 kN; Inventory:0.0; d:60,000 mm; Outer Diameter (mm):110,000; Characteristic cage frequency, FTF:0.5 Hz; Bearing ring (inner ring) WS:WS89312; Bearing number:K89312; Dc:110 mm; Eb:68.9 mm; Dc1:60 mm; Nlim (oil):2,700 rpm; Category:Roller Bearings; Lw:9 mm; Max operating temperature, Tmax:120 °C; Manufacturer Name:NTN; Min operating temperature, Tmin:-20 °C; Ca:162 kN; Characteristic rolling element frequency, BSF:9.68 Hz; |
| A8-25N2 Rotek Slewing Ring Bearings | dc(min):-; Size (mm):80x125x22; C0r:86.4; r(min):1.1; Ew:-; Bearing No.:NUP1016; Cr:87.2; B2:-; Db(max):-; Basic static load rating (C0):86.4 kN; Outer Diameter (mm):125; D:125 mm; rb(max):1; r min.:1.1 mm; B:22 mm; (Refer.)Mass(kg):0.994; Grease lub.:5300; r1 min.:1 mm; Bearing number:NUP1016; Width (mm):22; |
| 3R5-44P2A Rotek Slewing Ring Bearings | Cy (max):1.5 mm; a (max):1.1 mm; Limiting Speed - Oil:36,000 rpm; Snap Ring Outside Diameter:26.8 mm; Enclosure:Snap Ring Groove wit; Fillet Radius/Chamfer:0.3 mm; b (min):0.8 mm; d:12 mm; Snap Ring Width:0.7 mm; Static Load Rating:1,320 N; Radial Clearance:0.011 to 0.025 mm; Da (max):22 mm; ra (max):0.3 mm; B:6 mm; da (min):14 mm; Factor fo:14.5; D:24 mm; Bore Type:Cylindrical Bore; Dx (min):27.5 mm; |
| RKS.161.14.0844 SKF Slewing Ring Bearings | R - Inner Ring To Clear Radius1:1.0 mm; d:45 mm; r - Outer Ring To Clear Radius2:1.0 mm; Da - Outer Ring Backing Diameter:77.000 mm; B - Outer Ring Width:23 mm; B - Inner Ring Width:23 mm; Y1 - ISO Factor5:3.93; Design Unit:METRIC; D:85 mm; Reference Thermal Speed Rating (Oil)7:6800; da - Inner Ring Backing Diameter:55.000 mm; e - ISO Factor3:0.26; Superseded Part:22209KCJW841C3; Bore Taper:1/12; Y0 - ISO Factor4:2.64; |
| RKS.062.20.0844 SKF Slewing Ring Bearings | Ew:473 mm; Weight:109 Kg; (Grease) Lubrication Speed:1300 r/min; C:133 mm; Outer Diameter (mm):520; B:133 mm; Width (mm):133; Bore Diameter (mm):340; Basic static load rating (C0):3080 kN; Size (mm):340x520x133; d:340 mm; D:520 mm; Bearing number:NF3068; Basic dynamic load rating (C):1570 kN; |
| L6-22P9ZD Rotek Slewing Ring Bearings | Outer Diameter (mm):950; Size (mm):736x950x62; Bore Diameter (mm):736; d:736 mm; D:950 mm; Width (mm):62; Bearing number:ZB1.25.0860.200-1SPP; |
| RKS. 211430101001 SKF Slewing Ring Bearings | Bearing number:GEG30ET-2RS; Static Load Rating (Cor):338,000; Outer Width (Bo):20.0000; Outer Dia (D):55.0000; Inner Width (Bi):32.0000; Outer Diameter (mm):55; Material:Inner ring and outer; Dynamic Load Rating (Cr):140,000; Bore Dia (d):30.0000; Weight (g):296.00; Max. housing corner radius, or 45 deg. chamfer (ch):1.000; Mis-alignment Angle (a deg.):17; Spherical Diameter (dk or Dk):47.000; Bore Diameter (mm):30; |
| RKS.062.20.0744 SKF Slewing Ring Bearings | Width (mm):20; Size (mm):45x75x20; T:20 mm; Calculation factor (Y):1,5; db min:51 mm; da max:50 mm; Db min.:72 mm; Bearing number:32009AX; Da min:66 mm; (Grease) Lubrication Speed:4 700 r/min; Bore Diameter (mm):45; Weight:0,355 Kg; r1 min.:1 mm; Da max.:69 mm; r2 min.:1 mm; Basic static load rating (C0):79,8 kN; ra max.:1 mm; B:20 mm; Calculation factor (e):0,39; Basic dynamic load rating (C):60,7 kN; |
| A10-35P1A Rotek Slewing Ring Bearings | K - Factor7:1.34; G1 - Heat Generation Factor (Roller-Raceway)10:195; R - Cone Backface To Clear Radius1:0.06 in; Cg - Geometry Factor11:0.151; Bearing Weight:2.6 lb; Y - ISO Factor9:1.38; C1 - Dynamic Radial Rating (1 million revolutions)5:23700 lbf; C0 - Static Radial Rating:46400 lbf; D1 - Flange Outer Diameter:6.4647 in; G2 - Heat Generation Factor (Rib-Roller End):139; r - Cup Backface To Clear Radius2:0.06 in; |
| A14-24P1A Rotek Slewing Ring Bearings | static load capacity:96000 N; Maximum Capacity / Filling Slot:No; Noun:Bearing; maximum rpm (oil):3300 rpm; closure type:Single Shield; Internal Special Features:No; outside diameter:220 mm; Outside Diameter:8.661 Inch | 220 Mil; manufacturer product page:Click here; Manufacturer Item Number:6932Z; overall width:28 mm; cage material:Steel; Cage Material:Steel; bore type:Round; Weight / LBS:5.754; Internal Clearance:C0-Medium; |