| RK6-37N1Z Kaydon Slewing Ring Bearings | Basic Interchange FAF:207KL; Old MRC Bearing Number:207FS; Basic Radial Load Rating-Static SCO:15300 N; d:35.000 mm; Width - Overall B:21.0 mm; Basic Interchange NDH:8507; Basic Interchange BCA:8507; Width - Inner Ring B1:20.00 mm; Speed Rating-Single and Double Sealed Grease SDG:6300 rpm; Basic Radial Load Rating-Dynamic DC:25500 N; D:72.0000 mm; Fillet Radius ra:1.00 mm; Width - Outer Ring B0:17.0 mm; |
| MTE-705T Kaydon Slewing Ring Bearings | Sealed Speed Rating n3:0 rpm; Fillet Radius ra:2.50 mm; D:580.0000 mm; Basic Static Radial Load Rating Co:530000 N; B:56.00 mm; Accessories:Two Shields; Oil Speed Rating Open/Shielded n2:1100 rpm; d:460.000 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Basic Dynamic Radial Load Rating C:312000 N; |
| VLI200744-N INA Slewing Ring Bearings | Mass pillow block:195 kg; Ca:107.798 mm; End plug (suffix Y):EPR 21; Cap bolt, SAE grade:5; Cap bolt:4 x 7/8-9 UNC; P120°:136 kN; A2:358.775 mm; P180°:145 kN; R2:42.862 mm; H1:209.55 mm; J min.:571.5 mm; h:62.706 mm; Max. speed for Taconite seal:425 r/min; Cap bolt recommended tightening torque:271.2 N·m; P60°:364 kN; Stabilizing ring:SR-40-34; Initial grease fill:2154.6 g; da:182.563 mm; |
| 16280001 Kaydon Slewing Ring Bearings | Oil Speed Rating n2:5300 rpm; Basic Static Radial Load Rating Co:68000 N; Sealed Speed Rating n3:3000 rpm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:5300 rpm; Basic Dynamic Radial Load Rating C:104000 N; Grease Speed Rating n1:4500 rpm; Fillet Radius ra:2.00 mm; D:150.0000 mm; Grease Speed Rating Open/Shielded n1:4500 rpm; B:35.00 mm; d:70.000 mm; |
| HT10-30E1Z Kaydon Slewing Ring Bearings | H:190 mm; d1 ≈:880 mm; r1,2 min.:9.5 mm; C:92 mm; Da max.:860 mm; B1:183 mm; Fatigue load limit Pu:2900 kN; Minimum axial load factor A:140; Limiting speed:600 r/min; s:359 mm; Reference speed:320 r/min; d:630 mm; da min.:795 mm; ra max.:8 mm; D:950 mm; Basic dynamic load rating C:8450 kN; B:68 mm; Basic static load rating C0:38000 kN; Mass bearing:485 kg; D1 ≈:761 mm; |
| VSI200844-N INA Slewing Ring Bearings | G2:G 1/4; Mass withdrawal sleeve:479 kg; G:Tr 1120x8; A:15 mm; Nut for removal:HM 30/1120; G1:60 mm; d1:1000 mm; Hydraulic nut:HMV 224 E; B1:498 mm; B2:548 mm; d:1060 mm; |
| XSI140644-N INA Slewing Ring Bearings | Oil Speed Rating n2:8500 rpm; Basic Static Radial Load Rating Co:29000 N; d:30.000 mm; Sealed Speed Rating n3:6300 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; D:72.0000 mm; Grease Speed Rating n1:6300 rpm; B:33.30 mm; Basic Dynamic Radial Load Rating C:41600 N; |
| 16336001 Kaydon Slewing Ring Bearings | T:37.3 mm; Recommended tightening torque for grub screw:4 N·m; N:11.5 mm; B4:4.5 mm; Limiting speed:8500 r/min; A1:11 mm; Basic static load rating C0:6.55 kN; Basic dynamic load rating C:12.7 kN; GN:1/4-28 SAE-LT; Db1:58 mm; L:60.5 mm; Fatigue load limit Pu:0.28 kN; s1:18.3 mm; R1:20 mm; Da:50.8 mm; H:112 mm; A3:3.2 mm; Thread grub screw G2:1/4-28 UNF; SWN:7 mm; N4:2 mm; |
| VLA200644-N INA Slewing Ring Bearings | C:40 mm; Fatigue load limit Pu:16.6 kN; Da:53.5 mm; Basic static load rating C0:137 kN; r1,2 min.:0.3 mm; Basic dynamic load rating C:64.4 kN; Limiting speed:10000 r/min; Fw:45 mm; D:62 mm; E:53 mm; da:52.2 mm; Mass bearing:0.38 kg; Db:45.6 mm; ra max.:0.3 mm; Reference speed:9000 r/min; |
| HT10-60N1Z Kaydon Slewing Ring Bearings | Accessories:Two Seals; B:30.20 mm; Basic Dynamic Radial Load Rating C:51200 N; Sealed Speed Rating n3:5000 rpm; Grease Speed Rating n1:5000 rpm; d:45.000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:54000 N; Fillet Radius ra:1.00 mm; D:85.0000 mm; |