BE20-XL Radial Insert Ball Bearing 20x55x16mm
How do you UG Ball Bearing CORP. find 14 kN C the BE20-XL Radial Insert Ball Bearing 20x55x16mm specification? Manufacturers 3.7 Nm Recommended tightening torque for set screw Online Free check！
| Recommended tightening torque for set screw: | 3.7 Nm |
| T min.: | -40 °C |
| C: | 14 kN |
| Designation of open end cover: | SCOU205-16 |
| E: | 18 mm |
| s1: | 13.5 mm |
| G: | M6x1 |
| L: | 75 mm |
Product Details
| Recommended tightening torque for set screw | 3.7 Nm |
| T min. | -40 °C |
| C | 14 kN |
| Designation of open end cover | SCOU205-16 |
| E | 18 mm |
| s1 | 13.5 mm |
| G | M6x1 |
| L | 75 mm |
| H | 36.5 mm |
| J | 50 mm |
Company Profile
| Worktime |
9:00-18:00 (Beijing time) |
| Phone |
+54-51-5-547-6584 |
JU075XP0 Thin Section Ball Bearing 190.5x209.55x12.7mm Bearing
JU120CP0 Thin Section Ball Bearing 304.8x323.85x12.7mm Bearing
60 mm x 110 mm x 22 mm JU090CP0 Thin Section Ball Bearing 228.6x247.65x12.7mm Bearing
KB080XP0 Thin Section Bearing 8x8.625x0.3125 In
PHUSE25 PHUSE25-XL Take-up Housing Units Plummer Block Bearing
85 mm x 150 mm x 28 mm 2.381mm Plastic Ball- POM/PE/PP/PTFE